Windows 10 Enterprise 2019 LTSC for Dell Wyse Thin Clients Release Notes July 2021 Rev.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2020 2021 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents Chapter 1: Overview...................................................................................................................... 5 Chapter 2: Version matrix .............................................................................................................6 Chapter 3: Windows 10 Enterprise LTSC-2019 Maintenance Release 1........................................... 7 Release summary.....................................................................................................
MUI build behavior............................................................................................................................................................ 33 Overlay Optimizer..............................................................................................................................................................33 Application Launch Manager..................................................................................................................................
1 Overview The Windows 10 Enterprise 2019 LTSC operating system is designed to run on Dell Wyse Thin Clients. New releases are created to support new hardware platforms, correct defects, make enhancements, or add new features. NOTE: For details about the previous version, if applicable, or to determine which version of the operating system you need to select for your thin client, see Version Matrix.
2 Version matrix The following version matrix lists the platforms supported in each Windows 10 Enterprise 2019 LTSC for Dell Wyse Thin Clients release, and helps you select which type of thin client is appropriate for your work environment: Table 1. Version matrix Release version Release date Supported platforms 10.04.XX.06.21.00 July 2021 Windows 10 Enterprise ● Wyse 5070 Thin Client LTSC-2019 Maintenance ● Wyse 5470 Thin Client ● Wyse 5470 All-in-One Thin Release 1 Client 10.04.07.09.20.
3 Windows 10 Enterprise LTSC-2019 Maintenance Release 1 Release summary This release note contains information about the Windows 10 IoT Enterprise unified build 10.04.XX.06.21.00 that runs on Wyse 5070 Thin Client, Wyse 5470 Thin Client, and Wyse 5470 All-in-One Thin Client. The operating system is based on Windows 10 Enterprise 2019 LTSC, also known as Redstone 5 (RS5). This is a Windows 10 IoT Enterprise (LTSC 2019) unified build MR1 which supports English and MUI Languages.
Table 2. Build details of Wyse 5070 Thin Client (continued) Release detail Specification BIOS version 1.9.0 Table 3. Build details of Wyse 5470 Thin Client Release detail Specification Platform Wyse 5470 Thin Client Product Windows 10 IoT Enterprise 2019 LTSC Build version/Kernal version 10.0 Build number 10.04.08.06.21.00 BIOS version 1.6.0 Table 4.
Table 5. Port preferences (continued) Thin Client Port preferences ● ● ● ● ● NOTE: On Wyse 5070 Extended Thin Clients, you must enable the WiFi option in BIOS to use the expansion slot for second RJ45, SFP or VGA. Back headset is disabled if front headphone is used. When a monitor is connected using USB-C port, DisplayPort 2 becomes inactive. When a VGA monitor is connected the VGA optional port, DisplayPort 3 becomes inactive. Power option is available on the first serial port. PCle slot is available.
Table 8. Wyse 5070 Thin Client with Pentium processor (continued) Number of Displays Supported display resolution Three displays No 3 Yes 1. 4K resolution—3840 x 2160 @ 60 Hz 2. Non-4Kresolution—Up to 2560 x 1600 @ 60 Hz 3. If you connect three displays, two monitors will have 4K resolution and one monitor will have 2560 x 1600 @ 60 Hz. Table 9.
Figure 1. Ports of Wyse 5070 Extended Thin Client Table 11. Ports Ports DP1 DP2 DP3 VGA USB-C mDP4 3 mDP5 4 DP6 5 Monitor priority 1 2B 6 3B 7 3A 7 2A 6 4 5 6 4K display Yes resolution Yes Yes No 1 Yes Yes Yes Yes Non-4K resolution Yes Yes Yes 2 Yes Yes Yes Yes Yes 1. VGA port does not support 4K display. However, it supports a display with 1080p screen resolution. 2. VGA port supports 1080p screen resolution. 3. mDP4 port refers to the top mDP port of the AMD GPU slot.
● DP1 > DP2 > VGA > mDP4 > mDP5 > DP6 ● DP1> USB-C > VGA > mDP4 > mDP5 > DP6 Audio capability—Audio is supported on all DP ports except DP3.
Table 12. Test Environment (continued) Thin client CPU Name Build Package Name Wyse 5070 Extended Thin Client with Pentium processor Intel(R) Pentium(R) Silver J5005 CPU at 1.50 GHz Wyse 5070 thin client with Celeron processor Wyse 5470 Allin-One Thin Client Wyse 5470 Thin Client Product Version RAM SSD Size BIOS Version WIE10_LTSC_2 10.04.06.06.21.0 8 GB 019_UNIFIED_O 0 ctober2020 64 GB—Apacer 1.11.1 Intel(R) Celeron(R) J4105 CPU at 1.50 GHz WIE10_LTSC_2 10.04.06.06.21.
Table 15. QFEs (continued) KB Number Update Description KB5000822 Security Update for Microsoft WIE10 For more information, see support.microsoft.com. Operating system components Table 16. Driver details Drivers/ Files Wyse 5070 Thin Client Wyse 5470 All-in-One Thin Client Wyse 5470 Thin Client Display Adapter Intel UHD Graphics 600 (26.20.100.6998) Citrix Indirect Display Adapter (12.40.44.247) Intel UHD Graphics 600 (26.20.100.6998) Citrix Indirect Display Adapter (12.40.44.
Table 17. Common application, features, and files (continued) Application Version Ericom PowerTerm interconnect for thin clients 12.5.1 Ericom connect WebConnect client 7.5.1 Supported peripherals Table 18.
Table 18. Supported peripherals (continued) Product Category Input Devices Monitors Peripherals Wyse 5070 Thin Client Dell Adapter - USB-C to HDMI/DisplayPort with Power Pass-Through - DBQAUANBC070 - Combo Adapter N/A N/A ✓ Dell USB-C Mobile Adapter - DA300 - Slayer 3 - DA300 N/A N/A ✓ StarTech.com 1 Port USB to RS232 DB9 Serial Adapter Cable - Serial adapter - USB 2.
Table 18.
Table 18.
4 Windows 10 Enterprise 2019 LTSC for Dell Wyse Thin Clients Release summary This release note contains information about the Windows 10 IoT Enterprise unified build 10.04.07.09.20.00 that runs on Wyse 5070 Thin Client, Wyse 5470 Thin Client, and Wyse 5470 All-in-One Thin Client. The operating system is based on Windows 10 Enterprise 2019 LTSC, also known as Redstone 5 (RS5). This build can be pushed on thin clients with 32 GB eMMC, 64 GB SSD, 128 GB SSD and 256 GB SSD and higher with 4 GB RAM and 8 GB RAM.
Table 20. Build details of Wyse 5470 Thin Client (continued) Release detail Specification Build number 10.04.08.11.20.00 BIOS version 1.6.0 Table 21. Build details of Wyse 5470 All-in-One Thin Client Release detail Specification Platform Wyse 5470 All-in-One Thin Client Product Windows 10 IoT Enterprise 2019 LTSC Build version/Kernal version 10.0 Build number 10.04.07.11.20.00 BIOS version 1.7.0 Connection brokers ● VMware Horizon client version 5.4.0.10892 is supported.
Table 22. Port preferences Thin Client Port preferences Wyse 5070 Thin Client with Celeron processor ● Optional port can be used as second RJ-45, SFP, VGA, or second serial port. ● When monitor is connected on USB-C port, DisplayPort 2 becomes inactive. Wyse 5070 Thin Client with Pentium processor ● Optional port can be used as second RJ-45, SFP, VGA, or second serial port. ● Back headset is disabled if front headphone is used. ● When monitor is connected on USB-C port, DisplayPort 2 becomes inactive.
2. DP2 and USB Type-C port are mutually exclusive with USB Type-C port taking higher priority. Wyse 5070 Thin Client with Pentium processor Table 25. Wyse 5070 Thin Client with Pentium processor Number of Displays Supported display resolution 4K resolution 1 Non- 4K resolution 2 One display Yes Yes Two displays Yes Yes Three displays No 3 Yes 1. 4K resolution—3840 x 2160 @ 60 Hz 2. Non-4Kresolution—Up to 2560 x 1600 @ 60 Hz 3.
4. For three displays, Dell recommends that you configure first two 4K displays on the main board (DP1~DP3), and the third 4K display on AMD GPU card. 5. For four displays, Dell recommends that you configure first two 4K displays on the main board (DP1~DP3), and the remaining two 4K displays on AMD GPU card. Figure 2. Ports of Wyse 5070 Extended Thin Client Table 28.
Monitor priority—The following order defines the monitor priority set on Windows 10 IoT Enterprise for Wyse 5070 thin client: ● DP1 > DP2 > DP3 > mDP4 > mDP5 > DP6 ● DP1 > USB-C > DP3 > mDP4 > mDP5 > DP6 ● DP1 > DP2 > VGA > mDP4 > mDP5 > DP6 ● DP1> USB-C > VGA > mDP4 > mDP5 > DP6 Audio capability—Audio is supported on all DP ports except DP3. Important notes Hardware support information ● Rich 4K display capability is provided. ● Option for 802.11 a/b/g/n/ac wireless is provided.
Table 29. Test Environment (continued) Thin client CPU Name Build Package Name Product Version Intel Celeron® J4100 CPU @ 1.10GHz, WIE10_LTSC_2 10.04.07.09.20. 019_UNIFIED_O 00 ctober2020 RAM SSD Size BIOS Version 8GB 128GB 1.4.0 Table 30. Additional details Component Version Wyse Management Suite 1.4 and later versions Boot Agent 4.0.5 USB Imaging Tool 1.2.4 Used and free space details Table 31. Used and free space details Platform SSD\eMMC Size Used Space Free Space Wyse 5070 Thin
Table 33. Driver details (continued) Wireless Adapter Intel (21.70.0.6) Intel (21.70.0.6) Intel (21.70.0.6) Bluetooth Intel (21.70.0.3) Intel (21.70.0.3) Intel (21.70.0.3) Wyseramdisk.sys (Wyse RAM Disk driver) 5.0.2183.5 5.0.2183.5 5.0.2183.5 CAD-MAP-VDI 3.0.6.0 3.0.6.0 3.0.6.0 Table 34. Common application, features, and files Application Version WDA 14.4.6.5 PlatVsys 1.0.0.4 VMWare Horizon Client 5.4.0.10892 Merlin 4.0.7 Quick Config (Wyse Easy Setup) 2.0.0.161 ALM 1.1.0.
Table 35. Supported peripherals (continued) Product Category Adapters/ Cables Input Devices Peripherals Wyse 5070 Thin Client Wyse 5470 All- Wyse 5470 in-One Thin Thin Client Client Dell 2.0 Speaker System - AE215 N/A ✓ ✓ Dell Wireless 2.1 Speaker System - AE415 N/A ✓ ✓ Jabra Evolve 65 MS Stereo - Headset N/A ✓ ✓ Jabra Engage 65 Stereo Headset N/A ✓ ✓ Plantronics Savi W440M-400 Series convertible wireless headset - DECT 6.
Table 35.
Table 35.
Table 35.
5 New and enhanced features Wyse Easy Setup Wyse Easy Setup enables administrators to quickly and easily deploy configurations on thin clients. Wyse Easy Setup enables you to: ● Create a dedicated browser-focused client by configuring the Internet Explorer settings. ● Configure multiple broker connections such as Citrix, VMware, and Remote Desktop Protocol (RDP). ● Configure a device to create a dedicated application for a particular line of business.
Install Dell Application Store manually You can install Dell Application Store manually using any of the following methods: ● Using the DellApplicationStore.exe installer file . 1. Double-click the .exe file and click Install. 2. Select the required application and accept EULA to proceed with the installation. ● Exporting DellApplicationStore.exe installer file. 1. Export the configuration. 2. Save PowerShell file in thin client. NOTE: Do not save the file to C:\Wyse\WAPPS\DASrepository folder. 3.
7. Right-click the created package for DAS application and distribute the package by selecting distribute point. 8. Go to Software Library > Operating System and right-clickTask Sequence. 9. Create a custom task sequence. 10. Right-click Custom task sequence that is created and click Edit. 11. Click Add > General > Power Shell Script and provide the valid name. 12. Select the Enter a PowerShell script radio button. 13. Click Add Script > Open and select the .ps1 file. 14.
The Overlay Optimizer monitors the UWFs' overlay space and the content. Overlay Optimizer identifies higher overlay space consumption in write filter and moves the unused content to the Overlay Optimizer's disk overlay. Clearing the UWF overlay extends the device uptime. For more information, see Overlay Optimizer Release notes at downloads.dell.com/wyse. Application Launch Manager The Application Launch Manager (ALM) version 1.1.0.
ENERGY STAR specification Windows 10 IoT Enterprise on Wyse 5070 thin client is ENERGY STAR version 7.0 compliant. The following are the details in the Control Panel applet for power options: ● Supports Wake on LAN (WoL) during power off. ● Supports Idle state wake up from the sleep mode. ● Screen off timer is 10 minutes. ● Sleep timer is 15 minutes.
Log files for customization A log file is created for the customization scripts where you can view the overall script execution. Out-of-Box driver install All the respective device drivers are preinstalled in the operating system. System Center Configuration Manager 2016 server information System Center Configuration Manager (SCCM) is supported for standard deployment of images. User accounts You can log in as an administrator or as a standard user.
The following are the default registries excluded from being filtered by UWF: ● ● ● ● ● ● ● HKLM\Software\Wyse\ConfigMgmt HKLM\SYSTEM\CurrentControlSet\Control\WNT\UWFSvc HKLM\SOFTWARE\Microsoft\Windows Defender HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\HomeGroup HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList HKLM\SYSTEM\WPA HKLM\SYSTEM\CurrentControlSet\Control\WNT\DWCADTool CAUTION: Please follow proper write filter and Windows Page File usage instructions at all times.
Prerequisites The following are the pre-requisites to run the Custom Sysprep tool: ● Unified Write Filter must be disabled. ● Logging framework must be available on your thin client. ● Power Shell script execution environment must be available. ● Custom Sysprep and Configuration Sysprep (SCCM) scripts must be available. ● Host Name calculation feature must be available. ● If the flash drive or HDD size is more than 32 GB, reduce it to less than 32 GB for a better custom sysprep process.
Figure 3. Config Master 3. Click Next. The Configuration screen is displayed. Figure 4. Configuration 4. Select Custom configuration in the Configurations section. 5. Enable or disable hostname calculation in the Host Name calculation section. 6. Enter the appropriate values in the Configure Domain options section, and click Save Credentials—optional. 7. Click OK when prompted—optional. 8. Select Enable local account credentials changes—optional. The changes that are made to the credentials are applied.
9. Click Next. The Credential Manager page is displayed. 10. Select the user account, and type the login credentials. 11. Click Save. 12. Click Apply to save the changes. This process takes 5–10 minutes to complete. The device turns off after the Sysprep process is complete. NOTE: You cannot access the thin client if you terminate the Sysprep process. Make sure that the device is ready before you use the Sysprep tool.
Figure 6. Configuration 4. In the Configurations section, select SCCM configuration. 5. In the Host Name calculation section, enable or disable hostname calculation. NOTE: The Configure Domain Option and Configure local account credentials field are grayed out. 6. Click Apply to save the changes. After the completion of SCCM Config Sysprep, the HAgent service ends. You can now perform the pull operation using SCCM.
6 Resources and support Accessing documents using the product search 1. Go to www.dell.com/support. 2. In the Enter a Service Tag, Serial Number, Service Request, Model, or Keyword search box, type the product name. For example, Wyse 3040 thin client or Wyse ThinOS. A list of matching products is displayed. 3. Select your product. 4. Click Documentation. Accessing documents using product selector You can also access documents by selecting your product. 1. 2. 3. 4. 5. 6. 42 Go to www.dell.com/support.
7 Contacting Dell About this task NOTE: If you do not have an active Internet connection, you can find contact information from your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country/region or region and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues: Steps 1. Go to www.www.dell.com/support. 2.
