Administrator Guide

3. Click RDP connection protocol, and click Configure.
The Default RDP dialog box is displayed.
4. Click the Connection tab, and use the following guidelines:
a. Connection Description—Enter the descriptive name that is to appear in the connection list (38 characters maximum).
b. Host Names—Use the list to select the valid DNS server name or the IP address of the server to which the thin client
connection is to be made. You can also use Browse next to the box to make the selection you want. For example, a list
of WTS servers on the local network from which you can select.
NOTE: The server name may be resolved using one of two mechanisms: DNS, and WINS. DNS uses the default
domain name in the network control panel to attempt to construct an FQDN but will also try to resolve the name
without using the default.
c. Console mode—Select to set the RDP connection with Windows Console mode.
d. Display Resolution—Select the display resolution for your RDP connection.
In ThinOS version 8.6, you can select your preferred monitor on which you want to start the RDP session in full screen
mode based on the following scenarios:
142 Configuring the connection brokers