Help

● Provision to configure multiple display settings using the Wyse Display window.
● Provision to configure Remote Desktop Protocol application to reconnect to the server if the network connectivity is lost or
if the application fails.
● Provision to configure taskbar and Start menu.
● Provision to enable or disable the Help option. Allow Help option is added to the administrator user interface to enable
or disable the Help option in the user start menu. By default, the Help option is disabled for users in Kiosk mode. The
administrator must enable the Help option from the administrator user interface to enable the user to access it from the
Start menu.
NOTE: Enabling the Allow Help option allows the user to access Internet Explorer as the help file opens in Internet
Explorer.
● Provision to configure six display setup in the KIOSK mode with two screens per column and three screens per column.
Known issues
Table 5. Known issues (continued)
Issue ID Issue Description Workaround
WIN-1287 You cannot configure Wyse Easy Setup
when Dell Secure Client is enabled in the
thin client.
There is no workaround in this release.
WIN-1283 The Profiles windows stops responding
occasionally.
There is no workaround in this release.
WIN-1282 Disabled users are not removed from the
Users Profile list.
There is no workaround in this release.
WIN-1281 You cannot clear the Profile Name field
after you enter a name for a newly
added profile.
There is no workaround in this release.
WIN-1273 Display Position option does not work,
when the configured monitors are less
than the number of connected monitors.
There is no workaround in this release.
WES-613 Occasionally, black screen is observed
when you configure the Wyse Easy
Setup settings.
Administrator must reconfigure the
Wyse Easy Setup configurations from
the administrator user interface.
WES-611 All control panel items are available for
local and domain users in the Kiosk
mode.
The new user must log in after you
disable the write filter for the operating
system to create the user profiles and
HKCU user hive.
You can also exclude the profile using
NetXClean.
WES-602 When you click the network status
icon, two network status windows are
displayed on the Kiosk shell.
Close the network status window that is
not required.
WES-601 When you configure the keyboard
settings, cursor blinking rate settings are
not persistent after you reboot the thin
client.
Update the WCM configuration every
time the user logs in to the thin client.
WES-592 On thin clients running Windows
Embedded Standard 7—32-bit operating
system, the WCM API fails after you
configure the Wyse Easy Setup display
settings.
Do not enable the Wyse Easy Setup
personalization settings.
WES-583 When you unregister a thin client
running Windows Embedded Standard
7 MUI build from Wyse Management
Close the personalization settings
window.
10 Wyse Easy Setup version 2.0.0.158