Administrator Guide

Figure 34. Keyboard
a. From the Keyboard Layout drop-down list, select a keyboard layout. The default layout is set to English (United
States).
b. From the Delay before Repeat drop-down list, select the time for Repeat Delay. The time specifies the pause between
pressing the key on the keyboard and when the key starts repeating itself.
c. Click any of the following options to set the Repeat Rate:
● Slow
● Normal
● Fast
Repeat Rate specifies the speed at which the key repeats itself after you press and hold down a key on the keyboard.
d. Click any of the following options to set the Numlock status:
● None
● On
● Off
Numlock specifies whether the Numlock key on the keyboard must be turned on or turned off when you boot the
terminal.
e. In the Disabled keys field, enter the keys on the keyboard that must be disabled. Use a comma to separate multiple
entries.
3. Click OK to save your settings.
Function key combinations
The Wyse 5470 Thin Client supports the following Function (Fn) key combinations:
Table 30. Fn key combinations
Key ThinOS Local ICA session
Fn + Esc Fn lock/unlock Fn lock/unlock
Fn + F1 Mute Mute
Fn + F2 Volume down Volume down
Fn + F3 Volume up Volume up
Fn + F4 Not applicable—session only Not supported
Fn + F5 Not applicable—session only Not supported
Fn + F6 Not applicable—session only Not supported
Fn + F7 Not applicable Not applicable
Fn + F8 Not supported Not applicable—ThinOS local only
106 Configuring the thin client local settings