Administrator Guide

e. Select the Disable trackpad check box if you want to disable the touchpad on the device. This option is applicable only
to the Wyse 5470 Thin Client.
f. Select the Disable trackpad while typing check box if you want to disable the touchpad while typing using the
integrated keyboard. This option is applicable only to the Wyse 5470 Thin Client.
3. Click OK to save your settings.
Touchpad gestures
This section is applicable to the Wyse 5470 Thin Client.
The touchpad on the Wyse 5470 Thin Client contains two buttons for the right and left mouse-clicks. The following table lists
the supported touchpad gestures on the Wyse 5470 Thin Client:
Table 31. Touchpad gestures
Touchpad
gesture
Additional information
Moving the mouse
cursor
Moving with one finger, the entire touchpad including the area with the buttons can be used for the
mouse cursor movement.
NOTE: The sensitivity of the cursor movement on the area with the buttons is slower compared to
the other areas. This design is for the stability of the buttons.
Left-click
● Tapping with one finger anywhere on the touchpad works as the mouse left-click.
● Pressing the left button on the touchpad works as the mouse left-click.
Right-click
● Tapping with two fingers anywhere on the touchpad works as the mouse right-click.
● Pressing the right button on the touchpad as the mouse right-click.
Double-click
● Tapping with two fingers anywhere on the touchpad works as the mouse double-click.
● Pressing the left button twice on the touchpad works as mouse double-click.
Moving windows
● Press and hold the left button, and move the window by dragging a second finger on the touchpad.
● Dragging a window by tapping twice on the touchpad with one finger.
Zoom Placing two fingers on the touchpad and pinching or stretching out—Not supported.
Scroll Tapping two fingers and moving up or down.
From ThinOS 9.0 MR1 release onwards, the touchpad scroll direction is reversed. Slide two fingers up to
scroll down, and slide two fingers down to scroll up.
Configure the audio settings
About this task
This section describes how to configure the audio settings on your thin client:
Steps
1. From the desktop menu, click System Setup > Peripherals.
The Peripherals dialog box is displayed.
2. Click the Audio tab, and do the following:
108
Configuring the thin client local settings