Administrator Guide

Figure 36. Audio
a. From the Playback Devices drop-down list, select the type of the audio device.
● Move the slider either to the right or left to control the volume settings for playback devices.
● Select the Mute check box to mute the audio.
● Select the Speaker check box to enable the onboard speaker.
b. From the Recorded Devices drop-down list, select the type of the record device.
● Move the slider either to the right or left to control the volume settings for record devices.
● Select the Mute check box to mute the audio.
c. Use the Recorder tab to collect information about the speaker and microphone being used. You can examine the
performance of the speaker and microphone being used.
3. Click OK to save your changes.
PulseAudio
PulseAudio is a sound server that runs on ThinOS to deliver audio and manage audio devices. PulseAudio supports multiple audio
devices when using real-time audio applications in ICA sessions.
NOTE: You cannot disable the PulseAudio feature on your ThinOS client.
Configure the serial settings
About this task
This section describes how to configure the serial settings on your thin client.
Steps
1. From the desktop menu, click System Setup > Peripherals.
The Peripherals dialog box is displayed.
2. Click the Serial tab and do the following:
Configuring the thin client local settings
109