Administrator Guide

Figure 42. SMB
a. Select SMB—Select the SMB port from the drop-down list.
b. Printer Name—Enter the name of the printer. If you do not specify a printer name, the SMB shared printer name is
used automatically.
c. Printer Identification—(Required) Enter the type or model of the printer in the exact text of the Windows printer
driver name—including capitalizations and spaces.
Printer mapping in a Citrix session on ThinOS uses Citrix UPD (Universal Printer Driver). You can enter any string in the
Printer Identification field.
d. \\Host\Printer—(Required) Enter the IP address, computer name, or FQDN of the host and specify the shared name
of the printer. After you specify the values and move the cursor, the SMB credentials dialog box is displayed which
prompts you to enter the host username, password, and the domain name.
NOTE: If the host has not joined any domain, enter WORKGROUP in the domain name field.
e. Printer Class —Select the printer class from the drop-down list as PS.
f. Enable the printer device—Must be selected to enable the printer. It enables the device to be displayed on the remote
host.
3. Click OK to save your settings.
Using the printer setup options
About this task
This section describes how to configure the printer setup options.
Steps
1. From the desktop menu, click System Setup > Printer.
The Printer Setup dialog box is displayed.
2. Click the Options tab, and select a printer from the Default Printer drop-down list.
116
Configuring the thin client local settings