Administrator Guide

Request the certificate automatically using Wyse Management
Suite
Steps
1. Log in to Wyse Management Suite.
2. Go to Groups & Configs and select your preferred group.
3. Expand Edit Policies and click ThinOS 9.x.
The Configuration Control | ThinOS window is displayed.
4. In the Advanced tab, click Privacy & Settings.
5. Click SCEP.
6. Click the Enable Auto Enrollment slider switch to enable automatic certificate enrollment using the SCEP server.
7. Click the Enable Auto Renew slider switch to automatically renew the certificate.
8. Click the Select Install CA Certificate slider switch to install the root CA's certificate as a trusted certificate after
successfully getting the client certificate.
9. Specify the country/region name, state, location, and other details.
10. Click Save & Publish.
NOTE: You can also configure the SCEP Administrator URL, Admin User, Admin User Password, and Admin User
Domain options to request for SCEP certificate. If the enrollment password is not specified, the client uses the SCEP
Administrator URL, Admin User, Admin User Password, and Admin User Domain options to request SCEP. If you specify
the enrollment password, the enrollment password is used for SCEP, even though the password entered is invalid. In this
scenario, the SCEP Administrator URL, Admin User, Admin User Password, and Admin User Domain options are ignored.
Trusted Platform Module version 2.0
Wyse 5070, Wyse 5470, and Wyse 5470 All-in-One thin clients support disk encryption and decryption through Trusted Platform
Module (TPM) version 2.0. If the key in TPM does not match the current build, the ThinOS will reset to factory settings.
The following SSL/TLS ciphers are supported:
● TLS1.2_ECDHE_RSA_WITH_AES_256_GCM_SHA384
● TLS1.2_ECDHE_RSA_WITH_AES_128_GCM_SHA256
● TLS1.3_AES256_GCM_SHA384
● TLS1.3_AES128_GCM_SHA256
122
Using the system tools