Administrator Guide

Create unmanaged device auto assignment rules
About this task
To create rules for the unmanaged device auto assignment, do the following:
Steps
1. Click the Rules tab.
2. Select the Unmanaged Device Auto Assignment option.
3. Click the Add Rules tab.
4. Enter the Name, and select the Destination group.
5. Click the Add Condition option, and select the conditions for assigned rules.
6. Click Save.
The rule is displayed in the unmanaged group list. This rule is applied automatically, and the device is listed in the destination
group.
NOTE:
● If a select group is set as the Destination Group, the condition Assign device to the destination group is not
available.
● If a select group is set as the Destination Group, the condition Create a group under the destination group for
each unique value is not available.
Edit an unmanaged device auto assignment rule
Steps
1. Click the Rules tab.
2. Select the Unmanaged Device Auto Assignment option.
3. Select the rule and click the Edit option.
4. Enter the Name and select the Destination group.
5. Click the Add Condition option and select the conditions for assigned rules.
6. Click Save.
Disable or delete a rule
Steps
1. Click the Rules tab.
2. Select the Unmanaged Device Auto Assignment option.
3. Select a rule and click the Disable Rule option.
The selected rule is disabled.
4. Select the disabled rule and click the Delete Disabled Rule(s) option.
The rule is deleted.
Save the rule order
Steps
1. Click the Rules tab.
2. Select the Unmanaged Device Auto Assignment option.
3. Select the rule which you want to move and then move it to the top order.
4. Click Save Rule Order.
130
Using Wyse Management Suite