Reference Guide

Parameter Description
currently disabled or if Wyse Management Suite is
enabled but group-key is NULL.
If DCHP is defined and Wyse Management Suite is
enabled or not NULL—The Wyse Management Suite
Group key in the DHCP is ignored since it is configured
manually in local UI or from Wyse Management Suite
group change.
If INI is defined and Wyse Management Suite is enabled
or not NULL: The Wyse Management Suite Group key in
the INI is ignored since it is configured manually in local
UI or from Wyse Management Suite group change.
NOTE:
There is an exception in the logic above when the
'override=yes' option is used in INI file. This will make #2
take priority over #1.
For example,
WMSEnable=yes \ Server=xxx:8080
GroupPrefix=wlab GroupKey=TC-TEST-ENG
MQTTServer=xxx:1883 AdvancedConfig=yes
Override=yes
NOTE:
For detailed instructions on how to configure Wyse
Management Suite in a wnos.ini file to enable the Wyse
Management Suite Agent on supported ThinOS clients,
refer to Knowledge Base Solution #23875, go to the
Knowledge Base at
www.dell.com/support and search
for 23875.
CAValidation—If the option is set to yes, then the Wyse
Management Suite agent will check the certificate when
connected to https server. Default value is yes.
Discover— If the option is set to yes, then the Wyse
Management Suite agent will discover the Wyse Management
Suite server, MQTT server and CA validation from DNS Record.
Default value is yes.
IgnoreMqtt—If IgnoreMqtt=yes is specified, Wyse Management
Suite agent will not connect to MQTT server. Default value is no.
DefaultUser={username, $SYS_VAR}
[Display={yes, no}]
[disable={yes/no}]
Specifies the default sign-on user. See the System Variables
section for a list of system variables for $SYS_VAR.
Display—If the value is set to yes, the username field in sign-on
window will be displayed. By default the value is set to no and the
field will be obscured with asterisks (*).
disable— If the value is set to yes, the user name field in sign-on
window is disabled.
Password=<sign-on password>
[disable={yes/no}]
[encrypt={no, yes}]
Password— Specifies the password as the sign-on password.
There is no minimum length. The maximum length is 64 characters.
In wnos.ini this sets as the default password. The system will sign
on automatically and not wait for username, password, and domain
entries.
14 Parameters for wnos INI files only