Reference Guide

Parameter Description
For example,
ManualOverride=Yes
Components="display,timezone"
This INI statement allows you to customize display and
timezone settings, and these personalized settings are
not overridden by wnos.ini after the device restart.
MirrorFileServer={no, yes}
Default is no.
Yes/no option to enable the cache all server files functionality. This
enables the cache all server files such as INI files, wallpaper,
bitmap, font, local messages and so on to the local flash when files
are changed in the file server. ThinOS would use the cached files
when files on the file server are unavailable.
RootPath=<file server root path>
This file server root path is entered into thin client local setup (non-
volatile memory). The thin client immediately uses this path to
access files. The directory name \wnos will be appended to the file
server root path entry before use.
TerminalName=<name>
[reboot={no, yes}]
TerminalName — Name of the client comprising a 15-character
string. It can also be configured with system variables. Basically all
the variables can be used except $TN (recursive), $UN, $PW,
$DN. However, these are not yet available when parsing wnos.ini.
Additionally combinations like xy$mac, sz$tnxyz etc are supported.
reboot — Default is no. Yes/no option to reboot the thin client if
the terminal name is changed.
TimeZone=<zone value>
[ManualOverride={no, yes}]
[daylight={no, yes}]
[start=MMWWDD end=MMWWDD]
[TimeZoneName=<timezonename>]
[DayLightName=<daylightname>]
TimeZone — Specifies the time zone if the zone is unspecified on
the thin client or is used with ManualOverride. Supported zone
values s are listed in the System Preference dialog box on the thin
client and in TimeZone Parameter: Values.
NOTE:
The TimeZone parameter is dependent on the
TimeServer=parameter. If a time server is not defined,
the client CMOS/BIOS internal clock will be used as a
reference.
ManualOverride — Default is no. Yes/no option to override the
thin client System Preference Menu setting with this TimeZone
setting. TimeZone settings in the wnos.ini file will be saved into
NVRAM if EnableLocal=yes is set in the wnos.ini file.
Daylight — Default is no. Yes/no option to enable daylight saving
time; MMWWDD is a 6 digit number to specify the start and the
end of daylight saving time.
NOTE: The Start and End options are in the MMWWDD
format, where:
MM = Month of the year. Values are 01 to 12 for the
months of the year from January to December. For
example, 01 = January, 12 = December
WW = Week of the Month. Values are 01 to 05 for the
week of the month, 05 is the last week. For example, 01
= 1st week, 05 = the last week of the month.
16 Parameters for wnos INI files only