Reference Guide

Parameter Description
Service={snmpd, thinprint, vncd
vda <port number>} disable={no, yes}
Service — Specifies the services you can enable or disable; there are different
syntaxes for the different services.
disable — Default is no. Yes/no option to disable the services. Disable must
follow the Service parameter.
Service=snmpd disable={no, yes}
[community=<snmp_community> [encrypt={yes,
no}]]
[communityReadOnly=<snmp_community_read_
only> [encrypt={yes,
no}]]
[servers=server_list]
Default is no.
Service=snmpd disable — Yes/no option to disable the snmpd service.
community — The option community is same as the statement Community.
encrypt option is same as that in the statement community.
communityReadOnly— This option is to set community only has snmp get and
get_next privileges. The following encrypt option is only for indicating, if value of
communityReadOnly is encrypted.
Servers —This option is set to limit the valid snmp management site to the IP
addresses in the server_list parameter, which contains 1 to 4 IPv4 IP addresses
currently. If not, all the set IP addresses seen as valid.
Service=thinprint disable={no, yes}
[port=<port number>]
[PkSize={0-64000}]
Default is no.
Service=thinprint disable — Yes/no option to disable the thinprint service.
port — Same as the statement ThinPrintEnable={no, yes} port=portnumber.
PkSize — Specifies the default packet size that will be sent to the server when
negotiating with the thinprint server. The value 0 will rely on the server default
setting, 64000 in ThinPrint 7.6 and 32000 in previous ThinPrint versions.
ThinOS only allocates a buffer of 64K, so if the default packet size of the server is
above 64000, this setting must be set or printing will fail.
Service=vncd disable={no, yes}
[servers=server_list]
[HttpPort=_http_port_]
[TcpPort=_tcp_port_]
Service=vncd disable—Yes/no option to disable the vncd service, same as
MaxVncd={0, 1}.
Default is no.
servers—Use the servers option to limit the valid vncd client site to the IP
addresses in the server_list parameter, which contains IPv4 IP or IP range
addresses, such as 192.168.1.0/24; 192.168.2.48.
If this option is not set, all IP addresses are displayed as valid.
The service vncd supports both http and tcp connections. The option HttpPort
enables you to set the http port for vncd service. The default port is 5800.
The option TcpPort enables you to set the tcp port for vncd service. The default
port is 5900.
Service=<port number> disable={no, yes}
Default is no.
Yes/no option to disable the service with this port number.
SecurityPolicy={full, warning, low}
[SecuredNetworkProtocol={yes, no}]
[DNSFileServerDiscover={yes, no}]
[TLSCheckCN=[yes, no]]
[TLSDisableCipher={ cipher_name_list }]
Specifies the global security mode for SSL connection. If application SecurityMode
is default, application applies the setting.
If set to full, the SSL connection needs to verify server certificate. If it is untrusted,
connection is dropped.If set to warning, the SSL connection needs to verify server
certificate. If it is untrusted, it is up to you to continue or drop the connection. If set
to low, the server certificate is not checked.
The value is persistent, and the default value is warning. For those SSL
connections with their own security policy, this does not impact. For example, File
server, VMware View and AWS broker follows the global SecurityPolicy. Citrix
broker, RDS broker and SECUREMATRIX are forced to high security mode.
If the optional SecuredNetworkProtocol is set to yes, the unsecure protocols
including ftp, http and tftp are disabled. The value is persistent, and the default
value is no.
Parameters for wnos INI files only 31