Reference Guide

Parameter
* Global overrides identically-named user
profile
** After sign off, user profile returns to
global value
Description
If the optional DisableSerial=yes is set with Privilege={none, low}, the serial table in
peripherals setup will be enabled.
Continued from the previous table...
DisableChangeDateTime— If the optional DisableChangeDateTime is set, the
function of changing date and time locally will be disabled. For example, if you right-
click the time label in taskbar, nothing is displayed. The
Change Date and Time
button in System Preference will be invisible.
EnableVPNManager—If the optional EnableVPNManager=yes is set with
Privilege={none, low}, the VPN Manager setup is enabled.
TrapReboot— If the optional TrapReboot=yes is set, client reboots after the
execution of the trap.
EnableCancel— If the optional EnableCancel=yes is set with Privilege={none, low},
the counter down window for reboot or shutdown can be cancelled. The default value
is no.
For example, set the following ini,
Inactive=1
AutoSignoff=yes Shutdown=yes
ShutdownCounter=30
Privilege=none EnableCancel=yes.
After no mouse and keyboard input in 1 minute, the system will pop up a counter down
window to shut down in 30 seconds. You can cancel it.
EnablePeripherals—If the optional EnablePeripherals is set with Privilege=none, the
specified peripherals tab will be enabled. The value of the option can be a list of any
valid value separated with "," or ";". For Camera, Touchscreen and Bluetooth, they can
be enabled only, if the devices are available.
For example, Privilege=none lockdown=yes
EnablePeripherals=mouse,audio,camera,bluetooth, then mouse and audio tab will be
enabled. If there are camera and/or bluetooth devices, the camera and/or bluetooth
tab will be enabled too. The optional EnableKeyboardMouseSettings=yes can be
replaced as: Privilege=none lockdown=yes EnablePeripherals=keyboard,mouse.
FastDHCP— FastDHCP identifies the gateway first. If the gateway is same as the
network before disconnection and the previous DHCP information is valid, the same
information is used. The default value is yes.
TCPTosDscp—Use this option to set the TOS field of all TCP packets when the
fields are not pre-configured by other INI settings.
UDPTosDscp—Use this option to set the TOS field of all UDP packets when the
fields are not pre-configured by other INI settings.Added new sheet
TOS_Priority_settings for TosDSCP INI, which is merged from
TOS_Priority_settings.docx.
HideWlanScan—Use this option to disable WIFI scan in lockdown mode. The default
value is no.
EnableNewConnection—If the option, EnableNewConnection=yes is set with
Privilege=None or Privilege=Low, the New button of Connect Manager window in
classic mode or the Add Connection button in zero mode is enabled to permit new
connection. At the same time, the connection property is also enabled.
50
Parameters for wnos INI, {username} INI, and $MAC INI files