Reference Guide

Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
Disable— When you specify Disable=yes, the device is disabled.
For example, the Camera tab in peripherals setting is disabled, the
Exclude video devices option in Global Connection Settings is
disabled. The device cannot be accessed at local and remote
sessions.
The parameter Default=camera device name supports default
camera device setting.
Device=keyboard
[numlockoff={no, yes}]
[repeatrate={0, 1, 2}]
[repeatdelay={0, 1, 2, 3, 4, 5, 6, 7}]
[disabledKeys={PrtScn;SysRq}]
Device — Specifies the local keyboard.
numlockoff — Default is no. Yes/no option to turn off the
NumLock of the keyboard.
repeatrate — Default is 1. Specifies the keyboard repeat rate.
0 — Slow
1 — Medium
2 — Fast
repeatdelay — Default is 2. Specifies the keyboard delay in
seconds, before repeat.
0 — 1/5
1 — 1/4
2 — 1/3
3 — 1/2
4 — 3/4
5 — 1
6 — 2
7 — No Repeat
NOTE:
These settings in a wnos.ini file are saved into NVRAM if
EnableLocal is set to yes in the wnos.ini file.
disabledKeys=PrtScn;SysRq—You can use this parameter to
disable keys in the keyboard. Use semicolon (;) to separate each
key. Currently, only Prtscn and SysRq keys are supported.
Device=mouse
[Speed=[1-9]]
[Swap={yes, no}]
[FlipFlopWheel={yes, no}]
Speed is used to configure the speed of the moving mouse. 1 is the
slowest, 9 is the fastest. The default value is 6. This parameter is
the replacement of MouseSpeed.
If the option Swap is set to yes, the right button is set as the
primary button. The default value is no.
If the option FlipFlopWheel is set to yes the mouse scroll wheel is
inverted. The default value is no.
Device=Rfideas
[DisableBeep={yes, no}]
[DisableKeystroke={yes, no}]
[SetCardType={yes, no} Configuration1={*} Configuration2={*} ]
[DisableInitialization={yes, no}]
[DisableLed={yes, no}
Device=Rfideas — Specifies the local Rfideas readers.
DisableBeep — Default is yes. Option disables the beep sound
when the card is read.
DisableKeyStroke — Default is yes. Option disables the
keyboard movements and key strokes.
SetCardType — Default is no. Used only for pcProx Plug readers.
Parameters for wnos INI, {username} INI, and $MAC INI files 57