Reference Guide

Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
• If set to yes, then the Configuration #1 initializes to HID Prox
608x compatibility and Configuration #2 initializes to RDR-758x
Equivalent.
• If set to no, then the card type remains unchanged.
DisableInitialization — Default is no. Option disables
configurations to the card reader.
DisableLed—If set to yes, then LED is turned off. If set to no,
then LED is controlled by Reader. The default value is not set.
Device=UsbSerial
[start=com{1~4}]
[com{1~4}=com{5~8}]
Specifies the first COM port number that can be used by USB-
serial port.
For example, the first USB-Serial port on a VL10 thin client is
COM2 by default, but it can be changed to COM3 with the INI file
Device=UsbSerial Start=COM3.
1. Without any ini setting: The COM number registered is related
with USB port number. Since USB port number is hardware
property, it is always mounted in the same order, and there is
no relation with the plug sequence.
2.
If Device=UsbSerial start=COMx is set, then rule 1 does
not work, the COM number is set by "x", and "x" range is 1-4,
since ThinOS only supports maximum of four COM.
3. If COMx=COMy is set, the range for x is 1 - 4, and the real name
in ThinOS is considered. The range for "y" is 5 - 8, since ICA
running on ThinOS only supports maximum of eight COM.
NOTE: The INI [com{1~4}=com{5~8}] is applicable for
ICA connections only.
**DisableMouse={no, yes}
or
MouseDisable={no, yes}
DisableMouse — Default value is no. Yes/no option to disabled
mouse pointer so that it is shown on the screen. The pointer is
enabled if any mouse activity occurs.
or
MouseDisable — Default value is no. Yes/no option to disabled
mouse pointer so that it is shown on the screen. The pointer is
enabled if any mouse activity occurs.
Device=Mobile
TrackpadDisable={yes, no}
[CloseLidCharge={No, ShutDown, OffDisplay}]
[CloseLidDisCharge={No, ShutDown, OffDisplay}]
[BatteryAutoPowerOff={3-20}]
[TrackpadDisableOnType={yes, no}]
[TouchScreenDisable={yes, no}]
Device =Mobile—This option is applicable only to the Wyse 5470
Thin Client.
TrackpadDisable={yes, no}—Default value is no. The Yes/No
option enables or disables the trackpad.
[CloseLidCharge={No, ShutDown, OffDisplay}]—This parameter is
applicable for the Wyse 5470 Thin Client. This option specifies the
thin client behavior when you close the lid of the thin client
connected to an external power source and not running on battery.
The following are the values that you can set for CloseLidCharge:
• No—No action is taken when the lid is closed.
• ShutDown—The thin client shuts down when the lid is closed.
• OffDisplay—The built-in display and any external displays
connected to the thin client are turned off when the lid is
closed. This is the default value.
[CloseLidDisCharge={No, ShutDown, OffDisplay}]-This parameter
is applicable for the Wyse 5470 Thin Client. This parameter
58 Parameters for wnos INI, {username} INI, and $MAC INI files