Reference Guide

Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
**MouseSwap={0, 1}
0/1 option to swap the mouse buttons. For example, for left-
handed use.
0 — No
1 — Yes
NetworkPrinter=host/queue
[PrinterID=Window driver name]
[Enabled={no, yes}]
NetworkPrinter — Specifies the configuration for the network
(LPD) printer in the same way as described for the Printer Setup
dialog box in the Dell Wyse ThinOS Administrator’s Guide. The host
and queue parameters define the IP address and queue name of
the printer.
PrinterID — Specifies the Windows printer driver name.
Enabled — Default is yes. Yes/no option to enable the network
(LPD) printer.
Printer={COM1, COM2, LPT1, LPT2}
[Name=<name>]
[PrinterID=window_driver]
[Class=classname]
[Enabled={no, yes}]
[EnableLPD={no, yes}]
Default is COM1.
Printer — Specifies the local printer to configure.
Name — Specifies the name of the printer. This option must be
used.
PrinterID — If not specified, the default Generic/Text Only is
used.
Class — Used in ThinPrint print for TPAutoconnect; the ThinPrint
technology of mapping the printer from the client side. It can group
printers to use the same template on the ThinPrint server side. The
strings PCL5, PS, and TXT are pre-defined classes. Class can be a
string with 7 characters.
Enabled — Default is yes. Yes/no option to enable the printer.
EnableLPD — Default is no. Yes/no option to enable the LPD
service.
NOTE: The parameters must be specified in the order
shown.
Printer={LPD1, LPD2, LPD3, LPD4, LPD5-LPD36}
[LocalName=name]
[Host= host]
[Queue=queue]
[PrinterID=window_driver]
[Class=classname]
[Enabled={no, yes}]
Default is LPD1.
Printer — Specifies the LPD printer to configure.
LocalName — Specifies the name of the printer. If LocalName is
not specified, the Queue name is used.
Host — Specifies the host name of the printer.
Queue — Specifies the queue name of the printer.
PrinterID — Specifies the windows driver to use for the printer. If
not specified, the default Generic/Text Only is used.
Class — Used in ThinPrint print for TPAutoconnect; the ThinPrint
technology of mapping the printer from the client side. It can group
printers to use the same template on the ThinPrint server side. The
strings PCL5, PS, and TXT are pre-defined classes. Class can be a
string with 7 characters.
Enabled — Default is yes. Yes/no option to enable the printer.
These settings in a wnos.ini file will be saved into NVRAM if
EnableLocal=yes is set in the wnos.ini file.
NOTE:
60 Parameters for wnos INI, {username} INI, and $MAC INI files