Reference Guide

Option Description
Lowband={no, yes}
Default is no.
Yes/no option to enable optimization for low speed connections
such as reducing audio quality and/or decreasing protocol-specific
cache size.
Mapdisks={no, yes}
Default is no.
Yes/no option to auto-connect and map any connected USB flash
drive upon connection start.
Mapdisksunderz
NOTE: : DISCONTINUED. DO NOT USE
.
[NO_FontSmoothing={no, yes}]
Default is no—font smoothing is enabled by default.
Yes/no option to disable font smoothing. If set to yes, the font
smoothing is disabled.
NoReducer={no, yes}
Default is no.
Yes/no option to turn off compression. Default is no, which
enables compression. To turn off compression, enter yes.
Used here is an option of the Connect statement. It sets the value
of NoReducer only for this specified connection.
NOTE:
By default the ICA protocol compresses the data to
minimize the amount of data that needs to traverse the
network. This compression can be as much as 50
percent for text-based applications such as Microsoft
Word and 40 percent less for graphics applications than
the data streams that are not compressed.
Password={password, $SYS_VAR}
Password to log-in to the application server. Either a conventional
login password or a variable can be used. Maximum of 19
characters are allowed.
The value of password is a conventional login password.
The value of $SYS_VAR is a system variable found in Table:
System variables.
NOTE:
The application server password is not encrypted; it is
strongly recommended not to specify it. The user will be
prompted to enter the password when the connection is
made. This application server password directive never
starts a line, so it can be distinguished from the thin
client user sign-on password which does starts a line.
NOTE:
The Password option is not written into a {username}.ini
file by a user. When the New Password check box is
selected, the system writes the new, changed password
into the {username}.ini file with encryption. This
password is then checked against the sign-on password
with encryption to determine whether sign-on is
successful.
Password-enc=an encrypted password Specifies an encrypted string as a password for a connection.
92 Connect Parameter: Options