Reference Guide

Option Description
Fullscreen=Yes and DualHead=Yes will result in Span
Mode when connecting to a Windows server 2003 or a
Windows XP Pro Client.
Fullscreen=Yes and DualHead=Yes will result in Extended
mode when connecting to a Windows Server 2008 (any
version) and to a Windows 8 or above desktop.
Host=[name, IP, $SYS VAR]
Host — A list of server host names or IP addresses to which the
thin client will attempt to connect; the next server on the list is
attempted if the previous one failed. List items must be separated
by semicolons or commas.
NOTE:
$UN specifies that the sign-on user name is used and
should be set in a {username}.ini file. , see System
Variables. If set to Host=$UN in a {username}.ini file,
the hostname will display as the sign-on user name. If
set to Host=$UN in a wnos.ini file, the hostname will
display as the default Start.
Icon={default, bitmap file}
Specifies an icon to appear on the thin client desktop for a
connection. Use Icon=default to display a system default icon for a
connection.
To use an icon other than the default icon, enter the name with
extension of the bitmap file; ensure that the file is located in the
FTP server wnos\bitmap directory. If Icon= is not specified and the
icon is not specified by a PNAgent/PNLite server, no icon is
displayed for a connection.
KeepAlive={0 to 127}
Default is 10.
Specifies the number of minutes to keep a session connected after
the session is inactive. During this period, one dummy packet will
be sent to the server if network traffic is lost.
LocalCopy={no, yes}
Default is no.
Yes/no option to save the connection to the local NVRAM.
The connection description of the Description option is used as the
index key into the local connection table. If a match is found, then
the entry is updated. Otherwise, a new entry is created.
Maximum total of local entries is 16.
Logon_mode=prompt
Specifies one dialog box will pop up to allow a user to enter
username, password, and domain before connecting to the RDP
session. This can prevent the need to input credentials twice in
some cases of server redirection (load balancing).
Lowband={no, yes}
Default is no.
Yes/no option to enable optimization for low speed connections
such as reducing audio quality and/or decreasing protocol-specific
cache size.
Mapdisks={no, yes}
Default is no.
Yes/no option to auto-connect and map any connected USB flash
drive upon connection start.
NoReducer={no, yes}
Default is no — Enables compression.
96 Connect Parameter: Options