Setup Guide

Table 8. Peripheral Settings for wnos.ini Files, {username} INI, and $MAC INI files (continued)
Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
[FlipFlopWheel={yes, no}] If the option Swap is set to yes, the right button is set as the
primary button. The default value is no.
If the option FlipFlopWheel is set to yes the mouse scroll
wheel is inverted. The default value is no.
Device=Mobile
TrackpadDisable={yes, no}
[CloseLidCharge={No, ShutDown, OffDisplay}]
[CloseLidDisCharge={No, ShutDown, OffDisplay}]
[BatteryAutoPowerOff={3-20}]
[TrackpadDisableOnType=[yes, no]]
[TouchScreenDisable=[yes, no]]
Device =MobileThis option is applicable only to the Wyse
5470 Thin Client.
TrackpadDisable={yes, no}Default value is no. The
Yes/No option enables or disables the trackpad.
[CloseLidCharge={No, ShutDown, OffDisplay}]This
parameter is applicable for the Wyse 5470 Thin Client. This
option specifies the thin client behavior when you close the lid
of the thin client connected to an external power source and
not running on battery.
The following are the values that you can set for
CloseLidCharge:
No Only the built-in display is turned off and any
external displays connected to the thin client are turned
on when the lid is closed
ShutDownThe thin client shuts down when the lid is
closed.
OffDisplayThe built-in display and any external displays
connected to the thin client are turned off when the lid is
closed. This is the default value.
[CloseLidDisCharge={No, ShutDown, OffDisplay}]-This
parameter is applicable for the Wyse 5470 Thin Client. This
parameter specifies the thin client behavior when you close
the lid of the thin client running on battery and not connected
to any external power source.
The following are the values that you can set for
CloseLidDisCharge:
No Only the built-in display is turned off and any
external displays connected to the thin client are turned
on when the lid is closed.
ShutDownThe thin client shuts down when the lid is
closed. This is the default value.
OffDisplayThe built-in display and any external displays
connected to the thin client are turned off when the lid is
closed.
[BatteryAutoPowerOff={3-20}This parameter is
applicable to the Dell Wyse 5470 Thin Client when it is on
low battery.
This option specifies that the device shuts down if battery
capacity is lower than your set value. The value margin is 3
20 and the unit is percentage.
[TrackpadDisableOnType=[yes, no]]This parameter
disables the trackpad while typing when the value is set to
yes.
The default value is no.
[TouchScreenDisable=[yes, no]]This parameter disables
the touch screen when the value is set to yes.
64
Parameters for wnos INI, {username} INI, and $MAC INI files