Administrator Guide

Figure 25. Multiple displays
Every display contains a unique display order number and display configuration. You can move the blocks horizontally or vertically
and construct the multi-display layout in mixed directions. To construct a new display layout, move the blocks to your preferred
position, and click Apply. A new display layout is created. However, the system sets the block to its default position if the block is
moved to an incorrect position.
NOTE:
The Wyse 5470 Thin Client supports up to three simultaneous displays.
• Main screen—Select the Main screen check box to set the display as primary display or main screen. To set a display as main
screen, click the display block, and select the Main screen check box. After you set the display as main screen, the display block is
highlighted with an underline, and the Main screen option is disabled for that display block. The Main screen option is available
for other display blocks.
NOTE:
The main screen option is effective only in Span Mode and always disabled in Mirror Mode.
• Resolution—From the Resolution drop-down list, select a display resolution supported by your display.
NOTE:
The default screen resolution on the Wyse 5470 Thin Client is 1366 x 768 or 1920 x 1080 depending on the
configuration.
Configuring local settings 103