Administrator Guide

1. Connect the AC adapter to a power outlet. Then, connect the AC adapter to the 7.4 mm DC-in power input on the Dell Docking
Station WD19.
2. Connect the USB Type-C connector to the thin client.
3. Launch a VDI session. By default, the dock is redirected to a VDI session.
4. Download the Dock Firmware Update Utility from www.dell.com/support.
5. Start the tool.
6. Wait for all the information to be entered in the various Graphical User Interface (GUI) panes.
7. Click the Update button.
For more information about the Docking Station, see the Dell Docking Station WD19 User's Guide at www.dell.com/manuals.
Configuring the peripherals settings
The Peripherals dialog box enables you to configure the settings for the Keyboard, Mouse, Audio, Serial, Camera, Touch Screen, and
Bluetooth.
Configure the keyboard settings
To configure the keyboard settings:
1. From the desktop menu, click System Setup, and then click Peripherals.
The Peripherals dialog box is displayed.
Figure 26. Keyboard tab
2. Click the Keyboard tab and set the Character Set, Keyboard Layout, Delay Before Repeat and Repeat Rate parameters. The following
table explains the keyboard parameters.
Table 22. Keyboard settings
Parameter Description
Character Set Specifies the character set. Each character is represented by a number. The ASCII character set, for
example, uses the numbers 0 through 127 to represent all English characters and special control
characters. European ISO character sets are similar to ASCII, but they contain additional characters
for European languages.
Configuring local settings 105