Administrator Guide

• Converter is not supported.
• USB Type-C audio is not supported.
• Supports only audio over the integrated HDMI port with selected displays.
• Audio over DisplayPort, HDMI, and USB Type-C using the Dell WD19 docking station is not supported.
• Turning off or turning on the display is not supported. Restart the thin client for the DP audio to work in the following scenarios:
• If the power button is pressed, to power off, and then power on the display.
• If the screen saver is set to Turn Off Screen.
• If you click Apply on the Display setup window.
Limitations on the Wyse 5470 All-in-One Thin Client
• You must enable the DP audio as it is disabled by default.
• Hot plugging is not supported. You must plug in the DP cable, and reboot the thin client for the DP audio to work.
• Converter is not supported.
• Turning off or turning on the display is not supported. Restart the thin client for the DP audio to work in the following scenarios:
• If the power button is pressed, to power off, and then power on the display.
• If the screen saver is set to Turn Off Screen.
• If you click Apply on the Display setup window.
Using PulseAudio
PulseAudio is a sound server that runs on ThinOS to deliver audio and manage audio devices. PulseAudio supports multiple audio devices
when using real-time audio applications in ICA, RTME, and other VDI sessions.
NOTE:
You cannot disable the PulseAudio feature on your ThinOS client.
Configure the serial settings
To configure the Serial settings:
1. From the desktop menu, click System Setup, and then click Peripherals.
The Peripherals dialog box is displayed.
Figure 31. Serial tab
2. Click the Serial tab and do the following:
Configuring local settings
111