Administrator Guide

The tracert utility traces the path from your thin client to a network host. The host parameter is either a valid hostname or an IP
address. The tracert utility sends out a packet of information three times to each device (routers and computers) in the path and
displays the round-trip response times and identifying information in the message box.
7. Click the Telnet tab, and do the following:
Figure 43. Telnet tab
a) Enter the hostname.
b) Click Connect to connect to a remote host or device.
The Telnet window is displayed, and the troubleshooting window is closed automatically.
8. Click OK to save your settings.
Performing diagnostics
137