Administrator Guide

• Troubleshooting
• System Information
• System Tools
• VPN Manager
• Central Configuration
• System Preferences
• Display
• Printer Setup
• Remote Connections
NOTE: You are logged off from the ThinOS VDI broker and sessions in sleep mode. You must log in to broker sessions
again after resuming from sleep mode.
• Network Setup
NOTE: Peripherals windows are closed in sleep mode to reinitialize any peripheral devices after resuming from sleep
mode.
Enable sleep manually
To enable the Sleep option manually, use either of the following options:
• ThinOS lock window—To enter sleep mode using the ThinOS lock window, do the following:
1. Lock your thin client.
2. In the ThinOS lock window, click Sleep.
3. Click OK.
• Shutdown dialog box—To enter sleep mode using the Shutdown dialog box, do the following:
1. Open the Shutdown dialog box from Start menu.
2. Click Sleep, and then click OK.
You can wake the thin client from sleep mode by using the mouse, keyboard, power button, or the Wake-On-LAN feature.
Enable automatic sleep
To enable the thin client to automatically enter the sleep mode, do the following:
1. From the desktop menu, click System Setup, and then click System Preferences.
2. Click the General tab.
NOTE:
On the Wyse 5470 Thin Client, you must select either Battery or plugged in based on the power supply.
NOTE: If you using the Wyse 5470 All-in-One Thin Client, you can select only plugged in.
3. From the Screensaver drop-down list, select the Turn Off Screen option. The default value is 10 minutes.
4. From the After Turn Off screen drop-down list, select the Sleep option. The default value is 10 minutes.
5. From the Timer drop-down list, select the idle time after which you need the thin client to enter the sleep mode.
NOTE:
The Screen Saver and After Turn Off Screen options are always the same when the thin client is on battery or
if the AC adapter is plugged in. You can change the Timer based on your preference.
6. Click OK.
The sleep mode timer starts after screen is turned off by the screensaver. The device automatically enters the sleep mode when the
ThinOS client is left idle for the specified idle time.
NOTE:
The screen flashes for one second before automatically entering the sleep mode.
To resume the thin client from the sleep mode, perform any of the following actions:
• Press the power button.
• Click the USB mouse or move the wireless USB mouse.
NOTE:
By default, this feature is disabled. To enable the feature:
• On the Wyse 5470 Thin Client, connect the AC adapter to the thin client, and use INI parameter wakeonusb=yes.
• On the Wyse 5470 All-in-One Thin Client, use INI parameter wakeonusb=yes.
22 Getting started