Administrator Guide

• Press any key on the USB keyboard.

NOTE: By default, this feature is disabled. To enable the feature:

• On the Wyse 5470 Thin Client, connect the AC adapter to the thin client, and use INI parameter wakeonusb=yes.

• On the Wyse 5470 All-in-One Thin Client, use the INI parameter wakeonusb=yes.

• Press any key on the integrated keyboard. This option is applicable only to the Wyse 5470 Thin Client.

• Use the Wake on LAN feature to wake up from the sleep mode.

NOTE: On the Wyse 5470 Thin Client, you must connect the AC adapter to the thin client.

On the Wyse 5470 Thin Client, when you resume the system from the sleep mode, the system is first turned off and then turned on to

load the ThinOS operating system (cold reboot). This behavior is observed in the following scenarios:

• If the system has entered the sleep mode for 1 hour.

NOTE: You can change the timer setting using the INI parameter Sleep=yes, MaxSleepPeriod=[0-255].

• If the Dell Docking Station WD 19 is plugged in or out, and if there is a display attached to the docking station.

Additional getting started details

This section includes details about zero desktop, classic desktop, login dialog box, and system information.

Zero interactive desktop guidelines

The Zero Desktop has a default background with the Zero Toolbar at the left of the screen.

The following table lists the available Zero Desktop shortcuts:

Table 6. Zero Desktop shortcuts

Action Press

Display the Zero Toolbar Ctrl+Alt+UpArrow

Open a selection box for toggling between the desktop and

currently-active connections

Ctrl+Alt+DownArrow

Lock the thin client Ctrl+Alt+LeftArrow

Ctrl+Alt+RightArrow

Keyboard shortcuts to menu commands Left-Alt+UnderlinedLetter

Right-Alt+UnderlinedLetter

Capture the full desktop to the clipboard Print Screen

Capture the active window to the clipboard Alt+PrintScreen

NOTE:

• You can copy and paste between application sessions and between sessions and the desktop, however, this function

depends on session server configurations.

• In addition to the standard two-button mouse, the thin client supports a Microsoft Wheel Mouse used for scrolling.

Other similar types of a wheel mouse may or may not work.

Zero toolbar

The Zero toolbar usually appears at the left corner of the Zero Desktop. However, depending on administrator configurations, the toolbar

can be removed or hidden. It is shown only when a user moves the mouse pointer over the left edge of the desktop screen.

Administrators can configure the toolbar settings using either a dialog box, or the SysMode parameter in the wnos.ini file.

Getting started