Administrator Guide

Figure 5. RDP tab
a) Select the Enable Network Level Authentication (NLA) check box if you want to verify users before connecting to a full RDP
connection.
b) Select the ForceSpan check box to span the session horizontally across two monitors. This option enables you to use two
monitors as one large monitor.
c) Select the Enable TSMM check box if you want to enable the Terminal Service Multimedia Redirection.
d) Select the Record From Local check box if you want to enable recording from a local microphone.
e) Select the Enable RemoteFX check box to enable RemoteFX. RemoteFX is used to remotely deliver Windows virtual desktops
over a network connection.
f) In the Desktop Scale Factor box, enter the DPI value in percentage. This option enables you to define the desktop DPI remotely.
The Desktop Scale Factor is only applicable for the RDP connection. Setting this option does not impact the display scale of the
thin client locally. The DPI range is 100–500. If you enter a nonnumeric character, the value is automatically set to 100. If you enter
a value less than 100, the value is automatically set to 100. If you enter a value higher than 500, the value is automatically set to
500.
NOTE:
The desktop scale factor is applicable only to RDP version 8, and RDP 10 or higher versions. RDP version 7
is not supported.
5. Click the Horizon tab, and do the following:
Global Connection settings
31