Administrator Guide

Figure 18. VPN Manager tab
3. Click New to create a new session.
a) Session Name (up to 21 characters)—Enter the name of the Session Name. This is not a mandatory option. If the field is left blank,
the VPN server name will be used as the session name.
b) VPN server (up to 63 characters)—Enter the IP address of the VPN Server. This is defined as either an IP address or a host
name. This is a mandatory option.
c) Login Username (up to 31 characters)—Enter the Login Username. This is a mandatory option.
d) Login Password (up to 31 characters)—Enter the password of the user. This is not a mandatory option.
e) Select the check box to Auto-connect on system startup.
f) Select the check box to show progress in detail.
g) Click OK.
When the connections are created, the description column lists the session name and the Auto column shows which connection is
automatically connected when the unit restarts. Only one session can be set to auto-connect.
4. Click Connect.
The connection status is displayed.
Configuring connectivity
59