Administrator Guide

Cisco Jabber call statistics

Table 13. Cisco Jabber call statistics on Wyse 5470 Thin Client

Citrix Apps and Desktops VDI Video resolution Frame rate

7.15 LTSR Windows 10 x64 1280 x 720p 25 fps

Table 14. Cisco Jabber call statistics on Wyse 5470 All-in-One Thin Client

Citrix Apps and Desktops VDI Video resolution Frame rate

7.15 LTSR Windows 10 x64 1280 x 720p 25 fps

Using Citrix ADC

ThinOS supports Citrix application delivery controller (ADC), formerly known as Citrix NetScaler. The following authentication methods are

supported on ThinOS:

• Lightweight Directory Access Protocol (LDAP)

• RSA

• DUO

• SMS PASSCODE

• OKTA

Configure Citrix NetScaler Gateway using LDAP and RSA

To configure the Citrix NetScaler Gateway using LDAP and RSA authentication, do the following:

1. Go to NetScaler > NetScaler Gateway > Virtual Servers, and click Edit.

2. Set the primary and secondary authentications based on the following scenarios:

• If you use LDAP and RSA login, ensure that the primary authentication is LDAP and secondary authentication is RADIUS.

• If you use RSA and LDAP login, ensure that the primary authentication is RSA and secondary authentication is LDAP.

• If you use only LDAP login, ensure that the primary authentication is LDAP and secondary authentication is none.

3. Add the following INI parameter in the wnos.ini file, and configure your file server:

pnliteserver=<fqdn of NS Server> CAGAuthMethod={LDAP,LDAP+RSA,RSA+LDAP} Storefront={yes,no}

For more information about configuring Citrix NetScaler Gateway with LDAP, RSA authentication, see the Citrix NetScaler Gateway

Guide at www.citrix.com.

Configure Citrix NetScaler Gateway using DUO

To configure the Citrix NetScaler Gateway using DUO authentication, do the following:

1. Go to NetScaler > NetScaler Gateway > Virtual Servers, and click Edit.

2. Ensure that the primary authentication is RADIUS that is configured with the DUO authentication RADIUS.

3. Ensure that the secondary authentication is none.

4. Add the following INI parameter in the wnos.ini file, and configure your file server:

pnliteserver=<fqdn of NS Server> Storefront={yes,no}

For more information about configuring Citrix NetScaler Gateway with DUO authentication, see the Citrix NetScaler Gateway Guide at

www.duo.com.

Use Citrix NetScaler with CensorNet MFA authentication

SMS PASSCODE is re-branded as CensorNet MFA. You can configure NetScaler Gateway to use a One Time Passcode/Password (OTP)

in the form of a personal identification number (PIN) or passcode. To obtain this one-time password, you must install CensorNet app on

your mobile. After you enter the passcode or PIN, the authentication server invalidates the one-time password. You cannot enter the same

PIN or password again. For more information about configuring one-time passcode, see the

Citrix documentation.

Prerequisites

• NetScaler v12.0 and later is installed on your client.

Configuring the connection brokers