Administrator Guide

Figure 20. General tab
a) Battery or Plugged in—Select the Battery option if the device runs on battery. Select the Plugged in option if the device is
connected to an external power source.
NOTE:
On the Wyse 5470 All-in-One Thin Client, only the Plugged in option is available.
b) Screen Saver—Allows you to select the type of screensaver you want. The default is to Turn Off Screen.
Other available screensavers are Flying Bubbles, Moving Image, and Showing Pictures.
c) Timer—Select the idle time after which the screensaver is to be activated; either disable, 1 minute, 3 minutes, 5 minutes, 10
minutes (default), 15 minutes, or 30 minutes.
When the thin client is left idle for the specified idle time, the screensaver is initiated.
d) After Turn Off Screen—Specify whether the thin client must enter the sleep mode or power off after the screen is turned off
by the screen saver.
e) Timer—Select the idle time after which you need the thin client to enter sleep mode.
f) Locale—Select a language to be activated for the user login-experience; either French, German, or default English.
NOTE:
Locale changes the language for the user login-experience screens only displayed during boot-up and login
and not the configuration or administrator screens.
Only the following messages are applicable for French locales:
• Username/Password/Domain
• System Information
• Shut down the system, restart the system, reset the system setting to factory default
• OK, Cancel
• Initiating devices
Configuring local settings
97