Administrator Guide

• Looking up IP address from DHCP

NOTE: Pressing CTRL+ ESC key combination cancels the network check on the device.

• Retry DHCP for an IP address

• Waiting for network link. Verify that network cable is plugged into back of unit

• Check Cable, No Ethernet link

• Leave administrator mode

• Connecting

• Sign off from account

• Lock Terminal, Unlock Password

• Terminal is locked, Invalid unlock password

g) Terminal Name—Allows you to specify the name for the thin client. The default is a 14-character string that is composed of the

letters WT followed by the thin client Ethernet MAC address.

Some DHCP servers use this value to identify the IP address lease in the DHCP Manager display.

3. Click OK to save the settings.

The Wyse 5470 Thin Client behaves in the following manner when the lid is closed:

• With the AC adapter plugged in—Closing the lid turns off all displays including the external displays.

• Without the AC adapter plugged in—Closing the lid turns off the system.

You can change the close lid behavior by using the INI parameters. For more information about the INI parameters, see the Dell Wyse

ThinOS INI Reference Guide at www.dell.com/support.

Configure the time and date

To configure the time and date settings:

1. From the desktop menu, click the System Setup, and then click System Preferences.

The System Preference dialog box is displayed.

2. Click the Time/Date tab, and use the following guidelines:

Configuring local settings