Administrator Guide

NOTE: This issue is resolved in Windows 10 IoT Enterprise image builds later than version 10.03.06.10.18.00, and hence
you are not required to apply the registry entry manually.
To disable the link power management mode using a registry file, do the following:
1. Log in as an administrator.
2. Disable Unified Write Filter.
The system restarts.
3. Log in as an administrator again.
4. Open Notepad and type the following syntax:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\storahci\Parameters\Device]
"SingleIO"=hex(7):2a,00,00,00
"NoLPM"=hex(7):2a,00,00,00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\PowerSettings
\0012ee47-9041-4b5d-9b77-535fba8b1442\0b2d69d7-a2a1-449c-9680-
f91c70521c60\DefaultPowerSchemeValues\381b4222-f694-41f0-9685-ff5bb260df2e]
"ACSettingIndex"=dword:00000000
"DCSettingIndex"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\PowerSettings
\0012ee47-9041-4b5d-9b77-535fba8b1442\0b2d69d7-a2a1-449c-9680-
f91c70521c60\DefaultPowerSchemeValues\8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c]
"ACSettingIndex"=dword:00000000
"DCSettingIndex"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\PowerSettings
\0012ee47-9041-4b5d-9b77-535fba8b1442\0b2d69d7-a2a1-449c-9680-
f91c70521c60\DefaultPowerSchemeValues\a1841308-3541-4fab-bc81-f71556f20b4a]
"ACSettingIndex"=dword:00000000
"DCSettingIndex"=dword:00000000
5. Save the file as a .reg file.
6. Click Start.
7. Type cmd in the search field.
8. Right-click Command Prompt.
9. Click Run as administrator.
The User Account Control window is displayed.
10. Click Yes.
The elevated command prompt window is displayed.
11. Run the command reg import <file path of the registry file>.
12. Enable Unified Write Filter.
WiFi settings configured from Wyse Management
Suite are not persistent across multiple Wyse
5070 thin clients
When you configure a WiFi connection on a Wyse 5070 Thin Client, it connects to a specific wireless network (SSID) without asking for
the password. When the same configuration is exported to Wyse Management Suite and deployed to other Wyse 5070 Thin Clients, the
configuration is applied and you are prompted to enter a password to connect to the same wireless network. To make the WiFi settings
persistent, do the following:
Steps
1. Connect the Wyse 5070 Thin Client to the wireless network.
2. Run DWirelessProfileEditor.exe file.
The Wireless Profile Password Editor window is displayed.
3. Browse to the destination path to save the profile as an xml file and click Save.
4. Click the Export WiFi Profiles button in the Wireless Profile Password Editor window.
5. From the Profiles drop-down list, select the profile to deploy the configuration.
Troubleshooting
57