Administrator Guide

Figure 35. Display settings
Blocks displayed on the screen represent the number of monitor screens connected to the thin client. Each block
represents a single monitor screen.
Every monitor contains a unique display order number and display configuration. You can move the blocks horizontally or
vertically and construct the multi-display layout in mixed directions. To construct a new display layout, move the blocks
to your preferred position, and click Apply. A new display layout is created. However, the system sets the block to its
default position if the block is moved to an incorrect position.
NOTE:
○ The Wyse 5070 Extended thin client supports up to six monitors.
○ The Wyse 5470 Thin Client supports up to three simultaneous displays.
● Main screen—Select the Main screen check box to set the monitor as primary monitor or main screen. To set a
monitor as main screen, click the monitor block, and select the Main screen check box. After you set the monitor as
main screen, the monitor block is highlighted with an underline, and the Main screen option is disabled for that monitor
block. The Main screen option is available for other monitor blocks.
NOTE: Main screen option is effective only in Span Mode and always disabled in Mirror Mode.
● Resolution—From the Resolution drop-down list, select a display resolution supported by your monitor.
Configuring local settings
161