Reference Guide

Parameter Description
This parameter allows an administrator to enable or disable
authentication against a domain, to require the thin client to formally
join the domain, and to configure other domain parameters, such as
the name of the administrator group.
Domainjoin.ou It specifies the organization unit within Active Directory to which an
administrator can assign Group Policy settings.
EnableGKey={true, false} Default is true
EnableGKey option is used to enable G key reset.
EnableSsh={yes, no} Default is no, SSH server disabled. You can enable or disable SSH
server.
EnableTLSRSA=(yes/no) For Citrix only
By default, the parameter Enable_TLS_RSA_ is set to Yes. Use this
parameter to enable or disable the deprecated cipher suites.
EnableRC4MD5=(yes/no) For Citrix only
By default, the parameter Enable_RC4-MD5 is set to No.
Set this parameter to Yes to enable the RC4-MD5 cipher suite.
EnableRC4128SHA=(yes/no) For Citrix only
By default, the parameter Enable_RC4_128_SHA is set to No.
Set this parameter to Yes to enable the RC4_128_SHA cipher suite.
Firewall. Enable=Yes \
script=script_file_name
This parameter allows you to configure system firewall settings.
The script must be placed in wyse/wlx2/firewall directory on
the INI server.
IcaDisableWIFS={yes, no} Default is no.
IcaDisableWIFS option is used to disable the Citrix Firefox plug-in
feature that sends the option -WI_is_FS to its receiver.
If Firefox is in fullscreen mode, which makes Citrix receiver ignore
window size configuration, disabling the feature allows you to resize
their Citrix session when you are using Firefox Kiosk mode.
IdleAction.Enable={enable/disable}
[IdleAction.Timeout=<value of 1 to 60>]
[IdleAction.Action=<Any valid Command>]
IdleAction.Enable: Default is disable. Once enabled, Timeout should
be specified. If not specified, default timeout is 1 minute.
IdleAction.Timeout: To set the idle action timeout value in minutes.
IdleAction.Action: The String of commands to be executed. For
example, /usr/sbin/reboot. The default action is reboot.
ImportCerts ={yes, no}
[Certs=<String>]
ImportCerts:Default is no
It enables certificate import from the server.
Certs: certs is a list of certificate names (the names must be
separated by a semicolon).
For example, Certs=Cert1.cer;Cert2.crt;Cert3.pem;Cert4.der
NOTE: Certificates must be placed in the certs sub-
directory.
ImportConfig.FileURI=<string> Default is none
12 General settings parameter options