Reference Guide

Peripheral Settings Parameter Options
The following table contains parameters used for configuring peripheral settings such as keyboard, monitor, mouse, and printer.
Table 4. Peripheral Settings Parameter Options
Parameter Description
DisableBluetooth={yes, no} Default is yes.
This parameter allows you to enable or disable the Bluetooth function on
your thin client.
DisplaySettings=MON1<resolution=1920x1080>
MON2<resolution= 1024x768> MON3<resolution=
1024x768> or
MON1 <resolution=1920x1080@60> MON2
<resolution=1024x768@60>
MON3 <resolution=1920x1080@60> MON2
<resolution=1024x768@60>
MON3 <resolution=1920x1080@60>
MON1<resolution=1024x768@60>
This section is applicable to the Wyse 3040 and Wyse 5070 Thin Clients.
The string value is in the format of white space separated string
construct. The values keywords are case sensitive. The following are the
rules:
1. MON1/MON2 are mandatory constant values for monitor1 and
monitor2, if specific resolutions or placement are to be set for each
individual monitors.
2. To specify resolutions, use 1920x1080 format, resolution numbers
with delimiter x (lowercase) after MON1/MON2 value keyword.
Resolutions are optional. If not specified, DDC (optimal) resolutions
are used.
For Example : DisplaySettings=MON1 1920x1080 MON2 1920x1200
MON3 1920x1200
3. To specify resolutions with refresh rate: use 1920x1080@60
format, refresh rate is optional. If not specified, the optimal refresh
rate is used automatically.
For Example: DisplaySettings=MON1 1920x1080@60 MON2
1920x1200@60 MON3 1920x1200@60
MON1 primary 1920x1080 MON2 1920x1200:
Used for the specified configuration of primary monitor that is retained
previously. Primary monitor is where the taskbar and app icons are
present. It specifies monitor as the primary monitor, use the value
keyword primary, which is optional.
For Example: Set MON1 as primary : DisplaySettings=MON1 primary
1920x1080 MON2 1920x1200 MON3 1920x1200
Set MON2 as primary: DisplaySettings=MON1 1920x1080 MON2
primary 1920x1200 MON3 1920x1200
Set MON3 as primary: DisplaySettings=MON1 1920x1080 MON2
1920x1200 MON3 primary 1920x1200
MON1 primary on-left 1920x1080, MON2 on-right 1920x1200
To specify monitors in horizontal placement and on the left or right, use
the legacy value keywords on-left and on-right after MON1/MON2 to
arrange monitors left/right placement. You can use these options in pair.
MON1 primary on-above 1920x1080, MON2 on-below 1920x1200
To specify monitors in vertical placement and on the top or bottom, use
the legacy value keywords on-above and on-below after each MON1
MON2 and MON3to arrange monitors top/bottom placement. You can
use these options in pair.
4
16 Peripheral Settings Parameter Options