Reference Guide

Options Description
NOTE: This parameter is mandatory.
Icon=<image file> Specifies an icon to appear on the local desktop or Connection
Manager. The file must be located in the server wlx2/bitmap
directory. If not specified, the default icon is displayed except in the
case of a published application. A PNG, JPEG or GIF may be used.
XPM is permitted for backward compatibility.
JpegQuality=<integer{0 - 9}> Default is 8
JPEG Quality levels are,
0 = Low and 9 = High.
LocalCopy= {yes, no} Default is no.
LocalCopy saves the connection in the local permanent registry, if
LocalCopy parameter is set to yes.
Password=<base-64 encoded password> Specifies the password required to log in to the VNC server. Either
a base-64 encoded login password or a variable can be used.
password — base-64 encoded login password
$SN — Serial number
$MAC — MAC address
$IP — IP Address
$DN — Sign-on domain name
$UN — Sign-on name
$PW — Sign-on password
$TN — Terminal name
NOTE:
The VNC server password is not encrypted; not specifying it is
recommended. The user is prompted to enter the password when
the connection is made. This VNC server password directive never
starts a line, so it can be distinguished from the thin client user
sign-on password which starts a line
Shared= {yes, no}
Default is no
When a connection is shared, other viewers are not disconnected
when a new connection is established.
ViewOnly= {yes, no} Default is no.
VNC connection will be created in view only mode when this
parameter is set to Yes, which means mouse and keyboard input to
the remote machine will be disabled.
Ericom PowerTerm Connect Options
The following table contains the supported options you can use for Ericom PowerTerm Connect, where default values are in bold:
Example:
CONNECT=Ericom_Powerterm \
Description="Ericom_Test" \
Host=192.168.0.2 \
Connect Parameter Options
49