Service Manual

Steps
1. Align the base cover on the palm-rest and keyboard assembly, and snap the base cover into place.
2. Tighten the nine captive screws (M2.5x5) that secure the base cover to the palm-rest and keyboard assembly.
Next steps
1. Installing the SD memory card.
2. Follow the procedure in After working on your thin client.
Battery
Lithium-ion battery precautions
CAUTION:
• Exercise caution when handling Lithium-ion batteries.
• Discharge the battery as much as possible before removing it from the system. This can be done by disconnecting
the AC adapter from the system to allow the battery to drain.
• Do not crush, drop, mutilate, or penetrate the battery with foreign objects.
• Do not expose the battery to high temperatures, or disassemble battery packs and cells.
• Do not apply pressure to the surface of the battery.
• Do not bend the battery.
Removing and installing components 17