Service Manual

About this task

The following image indicates the location of the battery and provides a visual representation of the installation procedure:

Steps

1. Align the screw holes on the battery with the screw holes on the palm-rest and keyboard assembly.

2. Replace the four screws (M2x4) that secure the battery to the palm-rest and keyboard assembly.

3. Connect the battery cable to the system board.

Next steps

1. Installing the base cover.

2. Installing the SD memory card.

3. Follow the procedure in After working on your thin client.

Memory modules

Removing the memory module

Prerequisites

1. Follow the procedure in Before working on your thin client.

2. Removing the SD memory card.

3. Removing the base cover.

4. Removing the battery.

About this task

The following image indicates the location of the memory module and provides a visual representation of the removal procedure:

Removing and installing components