Service Manual

Steps

1. Using the alignment posts, place the I/O board on the palm-rest and keyboard assembly.

2. Replace the two screws (M2x3) that secure the I/O board to the palm-rest and keyboard assembly.

3. Adhere the I/O board cable to the palm-rest and keyboard assembly.

4. Connect the I/O board cable to the system board and close the latch to secure the cable.

Next steps

1. Installing the CAC reader.

2. Installing the battery.

3. Installing the base cover.

4. Installing the SD memory card.

5. Follow the procedure in After working on your thin client.

Coin-cell battery

Removing the coin-cell battery

Prerequisites

1. Follow the procedure in Before working on your thin client.

2. Replacing the SD memory card.

3. Replacing the base cover.

4. Replacing the battery.

5. Replacing the CAC reader.

6. Replacing the I/O board.

Removing and installing components