Service Manual

CAUTION: Do not lift greater than 50 pounds. Always obtain additional resources or use a mechanical lifting device.

1. Get a firm balanced footing. Keep your feet apart for a stable base, and point your toes out.

2. Tighten stomach muscles. Abdominal muscles support your spine when you lift, offsetting the force of the load.

3. Lift with your legs, not your back.

4. Keep the load close. The closer it is to your spine, the less force it exerts on your back.

5. Keep your back upright, whether lifting or setting down the load. Do not add the weight of your body to the load. Avoid twisting your

body and back.

6. Follow the same techniques in reverse to set the load down.

After working on your thin client

About this task

CAUTION: You must not leave any stray or loose screws inside your thin client. This may damage your thin client.

Steps

1. Replace all screws and ensure that no stray screws remain inside your thin client.

2. Connect any external devices, peripherals, or cables you removed before working on your thin client.

3. Connect your thin client and all attached devices to their electrical outlets.

4. Turn on your thin client.

Working on your thin client