Deployment Guide

Table 6. Connection Settings: wnos.ini files only (continued)
Parameter Description
3. Certificate verification passes
4. CN and SAN on the certificate matches the DNS
naming
For Example: FileServer=https://10.151.122.66:444
SecurityMode=warning.
The option Username-Enc specifies AES encrypted
username of the file server.
The option Password-Enc specifies AES encrypted password
of the file server.
Use Windows Password_Gen tool to generate the encrypted
string.
FormURL=URL to a file
Specifies the URL to the name of a bitmap file
(.ico, .bmp, .jpg, or .gif), to be displayed in the sign-on
window, residing under the thin client home directory. The
length of the path, including the home directory and the file,
is limited to 128 characters. If auto dial-up is enabled, this
statement is invalid.
HealthCastServer=vip list
[LogLevel={0, 1, 2 ,3}]
[SecurityMode={default, full, warning, low}]
[ClientCertificate=certificate file name]
Specifies a list of VIP addresses with optional TCP port
number of HealthCast servers.
LogLevel—The option LogLevel is for debug purpose; 0
means no log.
SecurityMode —Specifies the SSL certification validation
policy. If set to default, it will apply SecurityPolicy setting.
If set to full, the SSL connection needs to verify server
certificate. If it is untrusted, then drop the connection. If
set to warning, the SSL connection needs to verify server
certificate. If it is untrusted, you may still continue or drop
the connection. If set to low, the server certificate will not be
checked. The value will be persistent, and the default value of
the setting is default.
ClientCertificate —The option specifies the client
certificate file name during SSL connection between
Healthcast server and client.
INACTIVE=minutes
[NoSessionTimer=minutes]
[LockTimer=seconds]
Default is 0. There is no Idle timeout. The range is 0 minutes
to 480 minutes.If the value given is bigger than 480, 480 is set
instead. If the value given is smaller than 0, 0 is set instead.
When the system idle is time out in the configured minutes,
the system will automatically sign off, reboot or shutdown
which are based on the setting of AutoSignoff.
NoSessionTimer— The parameter NoSessionTimer has the
same range as INACTIVE and it is valid only if INACTIVE
value is not 0. If there is a session use the value of Inactive,
otherwise use the value of NoSessionTimer, if NoSessionTimer
is configured.
If AutoSignoff=yes Shutdown=yes is configured, then this
statement can work before signon.
If AutoSignoff=yes Reboot=yes is configured, this statement
can work before signon.
LockTimer—If the parameter LockTimer is set, the terminal
is locked and the system idle is timeout in the configured
26 Parameters for wnos INI files only