Setup Guide

Table 9. Connection Settings: wnos.ini files, {username} INI, and $MAC INI files (continued)
Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
[DeleteWirelessProfile={0,1}]
Continued from the previous table...
DisableWlan— Used to disable the wireless connection. If
DisableWlan=EnetUp, and the Ethernet is on while booting,
the wireless connection is disabled.
Device=Wireless Mode=Infrastructure
SSID=ThinIsIn
IEEE8021X=yes network=wireless
profile=ThinIsIn access=WPA2-ENT
eap=yes eaptype=EAP-PEAP peapeap=EAP-
MSCHAPV2
Device=Wireless Mode=Infrastructure
SSID=wtos_95 roamsensitive=high
IEEE8021X=yes network=wireless
profile=wtos_95 access=WPA2-ENT
eap=yes eaptype=EAP-PEAP peapeap=EAP-
MSCHAPV2
Device=Wireless Mode=Infrastructure
SSID=wtos_11n
IEEE8021X=yes network=wireless
profile=wtos_11n access=WPA2-PSK
wpa2pskpwd=2wsx3edc
Device=Wireless
Priority="wtos_11n,wtos_95,ThinIsIn"
The DriverLogLevel parameter enables you to change the
debug level of Intel wireless driver or firmware printing. The
following are the values and corresponding debug levels:
● 1—Error
● 2—Warn
● 3—Info
● 4—Debug
For example, if you set the debug level value to 1 (Error) the
useful error information is displayed.
The DriverDebugLevel parameter specifies which
information related to Intel wireless driver or firmware needs
to be printed.
This option is valid only with the DriverLogLevel parameter.
Ensure that you specify a value for the DriverLogLevel
parameter before you use this parameter.
The following are the valid values:
● #define DBGLVL1 (IWL_DL_INFO)
● #define DBGLVL2 (DBGLVL1 | IWL_DL_FW_ERRORS)
● #define DBGLVL3 (DBGLVL2 | IWL_DL_TEMP |
IWL_DL_POWER)
● #define DBGLVL4 (DBGLVL3 | IWL_DL_ASSOC |
IWL_DL_TE)
● #define DBGLVL5 (DBGLVL4 | IWL_DL_DROP |
IWL_DL_RADIO)
● #define DBGLVL6 (DBGLVL5 | IWL_DL_SCAN |
IWL_DL_HT)
● #define DBGLVL7 (DBGLVL6 | IWL_DL_MAC80211 |
IWL_DL_FW)
74
Parameters for wnos INI, {username} INI, and $MAC INI files