Dell Wyse ThinOS Version 8.5 and ThinOS Lite 2.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2019 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents 1 Overview........................................................................................................................................................ 6 2 Version matrix................................................................................................................................................ 7 3 ThinOS 8.5_024 and ThinOS Lite 2.5_024..................................................................................................... 9 Priority and recommendations...
Simplified Certificate Enrollment Protocol enhancement..................................................................................... 40 Other references........................................................................................................................................................40 Supported platforms........................................................................................................................................................40 BIOS information........
Accessing documents using the product search.......................................................................................................... 91 Accessing documents using product selector...............................................................................................................91 Additional resources......................................................................................................................................................... 91 12 Contacting Dell.......
1 Overview Dell Wyse ThinOS software is designed to run on a broad array of Dell Wyse hardware platforms. Dell Wyse ThinOS Lite family of products are zero clients built for Citrix Virtual Apps and Desktops environments. New releases are created to support new hardware platforms, correct defects, make enhancements, or add new features.
2 Version matrix The following version matrix lists the platforms supported in each ThinOS release, and helps you select which version of ThinOS software is appropriate for your work environment. Table 1. Version matrix Release version Release date Supported platforms ThinOS 8.5_024 December 2018 • • • • • • • • • Release Notes • • • Release version ThinOS 8.
Release version Release date Supported platforms • • Wyse 5060 thin client with PCoIP Wyse 7010 thin client with ThinOS (Z10D) Release Notes ThinOS Lite 2.5_020 September 2018 • • • Wyse 3010 zero client for Citrix Wyse 3020 zero client for Citrix Wyse 5010 zero client for Citrix Release version ThinOS Lite 2.5_020 ThinOS 8.5_107 June 2018 • • Wyse 5070 thin client Wyse 5070 Extended thin client Release version ThinOS 8.5_107 ThinOS 8.
3 ThinOS 8.5_024 and ThinOS Lite 2.5_024 Priority and recommendations Recommended: Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software). Feature updates This section contains information about the feature updates. • VMware Horizon package is updated to version 4.6.
Platform Image file name BIOS file name Wyse 5060 thin client with PCoIP PD10Q_wnos PD10Q_bios.bin Wyse 7010 thin client with ThinOS—Z10D ZD10_wnos Z10G_bios.bin Packages The following table provides the list of the packages that are available: Table 3. Packages Package name Version FR 1.20.46089 Horizon 4.6.51718 RTME 2.4.48792 TCX 7.1.41853 Tested environment The following tables display the testing environment for the respective attributes: Table 4.
Windows 7 Windows 10 Linux Windows Server 2008 R2 Windows Server 2012 R2 Windows Server 2016 Application Citrix Virtual Apps and Desktops 7.15 and Citrix Virtual Apps 7.15 √ √ √ √ √ √ Tera PCM for Amazon WorkSpaces 1.03 √* Not applicable Not applicable Not applicable Not applicable Not applicable Microsoft Remote Desktop Services (RDS) 2012 R2 and RDS 2016 √ √ √ √ √ *Amazon WorkSpace VM operating system—Windows 7 style—is based on 2008 R2 RDSH. Table 6.
Issue number Description TIR97872 Resolved an issue where importing a root certificate fails. TIR97723/TIR96094 Stability is improved to avoid the Trap Error 14 in the Blast session. TIR98003 Audio quality is improved in the RDP session. TIR98172 Resolved a DaaS issue where the Connection tunnel failed message is displayed during two-factor authentication. TIR97897 Resolved an issue where an active Server Name Indication (SNI) displays the SSL: error ERR_SSL_NO_CIPHER_MATCH error message.
Issue number Description TIR96236 Improved the session reconnection period when using the VMware Horizon client. TIR97153 Resolved an issue where the data cannot be copied to a USB drive on the Wyse 3020 thin client. TIR98539 Resolved an issue where a single enumerated session does not automatically launch in the VMware Horizon client. TIR98537 Resolved an issue where the OnDesktop parameter is not recognized in the zero launch bar (VDI) mode.
4 ThinOS 8.5_115 Priority and recommendations Recommended: Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software). Feature updates This section contains information about the feature updates. • VMware Horizon package is updated to version 4.6.51718 to resolve the user trap issue on Blast protocol.
Figure 1. Display priority NOTE: For more information about ThinOS features, see the Dell Wyse ThinOS Version 8.5.1 Administrator's Guide at Dell.com/ support. Supported platforms Table 9. Supported platforms Platform Image file name BIOS file name Wyse 5070 thin client with ThinOS X10_wnos X10_bios.bin Wyse 5070 thin client with PCoIP PX10_wnos X10_bios.bin Packages The following table provides the list of the packages that are available: ThinOS 8.
Table 10. Packages Package name Version FR 1.20.46089 Horizon 4.6.51718 RTME 2.4.48792 TCX 7.1.41853 Tested environment The following tables display the testing environment for the respective attributes: Table 11. Test environment - General components Component Version Wyse Management Suite 1.2 Wyse Device Manager 5.7.3 Imprivata OneSign 5.5 Caradigm 6.3.1 NetScaler 11.1/12.0 StoreFront 3.12 Web Interface 5.4 SecureMatrix 4.1.0 Table 12.
Windows 7 Windows 10 Linux Windows Server 2008 R2 Windows Server 2012 R2 Windows Server 2016 Application (RDS) 2012 R2 and RDS 2016 *Amazon WorkSpace VM operating system—Windows 7 style—is based on 2008 R2 RDSH. Table 13. Test environment - Citrix Virtual Apps and Desktops Citrix Virtual Apps and Desktops/Citrix Virtual Apps Operating system Citrix RealTime Media Engine (RTME) Lync client 7.15 Windows 7 2.4 Skype For Business 2016 Skype For Business 2015 Windows 10 2.
Issue number Description TIR97820 Resolved an issue where SCEP renewal occurs during the system bootup. TIR97763 Resolved a smart card issue related to secure messaging mode. TIR98325 Resolved an issue where the Numlock LED status is turned off after you disconnect from a VDI desktop in the Blast session. TIR98318 Resolved a Citrix NetScaler two-factor authentication log in issue where the incorrect session cookie is removed when the Storefront server FQDN is same as the NetScaler FQDN.
Issue number Description TIR98491 Resolved an issue where Failed To Set Admin Password message is displayed in Event Log after you change the BIOS password. ThinOS 8.
5 ThinOS 8.5_113 Priority and recommendations Recommended: Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software). Feature updates • Dell Wyse 5070 thin clients with ThinOS version 8.5_113 are IPv6-certified. • Dell Wyse 5070 thin clients with ThinOS version 8.5_113 are ENERGY STAR compliant.
Known issues None Fixed issues This section describes the fixed issues in this release. Table 17. Fixed issues Issue number Issue description TIR94834 After reboot, you cannot reconnect the Bluetooth headsets, and you must reboot headsets to reconnect. This functionality works as designed by Intel. TIR96293 SessionConfig=RDP, GracefulReconnTimeout=xx If you connect to RDP Windows 10 without the RemoteFX session and enable H.
6 ThinOS 8.5_107 Priority and recommendations Recommended: Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software). New features This section contains new features in this release.
Dual Network Interface Wyse 5070 thin client supports an optional module—RJ45/SFP. If you use an optional RJ45 or SFP module, dual NIC is enabled and the wireless connection is disabled. In the Network Setup window, the dual network interface options are displayed—ENET0 and ENET1. Figure 2. Network Setup In the ENET tab, from the Ethernet Select drop-down list, select ENET0 or ENET1 to configure the corresponding Ethernet connection settings. ThinOS 8.
Figure 3. ENET In the System Information window, the ENET tab is modified as displayed in the following screenshot: Figure 4. System Information To view all the network information, click Details. 24 ThinOS 8.
Figure 5. Details For the list of known issues about the Dual Network Interface (NIC), see Known issues. Trusted Platform Module version 2.0 Wyse 5070 thin client supports disk encryption and decryption through Trusted Platform Module (TPM) version 2.0. • Measured boot—SHA1(Secure Hash Algorithm 1) is used to produce a hash value for ThinOS image, and extend the integrity measurement into Platform Configuration Registers inside TPM—TPM_PCR16. This is used to generate disk encryption/decryption key.
Figure 6. Event Log Figure 7. Event Log – After the disk partition is formatted, some user configurations, such as display settings, user certificates, wireless settings—except the first SSID, as it is saved in NVRAM—cookie, and mirror file server data, are lost. Mouse settings To access the mouse setting, go to System Setup > Peripherals and select Mouse. The following two options are introduced in the mouse setting: 26 ThinOS 8.
Figure 8. Mouse settings • Reverse mouse wheel scroll direction—Select the Reverse mouse wheel scroll direction check box to invert the direction of the mouse scroll wheel. A new INI parameter FlipFlopWheel is introduced. For more information about the INI parameter, see INI parameters. • Enable big mouse pointer—Select the Enable big mouse pointer check box to increase the size of the local mouse pointer by two times. A new INI parameter Big is introduced.
Figure 9. Mirror mode If you clear the Mirror mode check box, the Span Mode is enabled. The following screen represents the span mode configuration: 28 ThinOS 8.
Figure 10. Span mode Blocks displayed on the screen represent the number of monitor screens connected to thin client. Each block represents a single monitor screen. Every monitor contains a unique display order number and display configuration. You can move the blocks horizontally or vertically and construct the multi-display layout in mixed directions. To construct a new display layout, move the blocks to your preferred position, and click Apply. A new display layout is created.
• Resolution—From the Resolution drop-down list, select a display resolution supported by your monitor. In Mirror Mode, the resolution list is derived from the intersection of resolutions in all connected monitors. In Span Mode, select a monitor block and change its resolution from the Resolution drop-down list. • 3 Rotation—From the Rotation drop-down list, select an option to rotate the monitor screen in different directions—Left turn 90 degrees or Right turn 90 degrees.
Table 19. Display matrix Number of displays Supported display resolution 4K resolution 3840 x 2160 @ 60 Hz Non-4K resolution Up to 2560 x 1600 @ 60 Hz One display Yes Yes Two displays Yes Yes Three displays¹ Yes Yes ¹Dell recommends that you configure a maximum of two displays with 4K resolution and the third display with non-4K resolution on DisplayPort 3 for optimized stability and performance.
Ports DP1 DP2 VGA USB Type-C Non-4K display Yes Yes Yes² Yes ¹DP2 and USB Type-C port are mutually exclusive with USB Type-C port taking higher priority. ²VGA port supports only 1080p resolution. NOTE: 4K resolution @ 60 Hz on USB-C type port is tested using the Type-C to HDMI and DP adapters. Dell monitor S2718D with USB type-C port supports up to 2560 x 1440 resolution. Wyse 5070 Extended thin client with AMD GPU Table 23.
Figure 11. Ports on Wyse 5070 Extended thin client Monitor priority—The following order defines the monitor priority set on ThinOS for Wyse 5070 Extended thin client: • DP1 > DP2 > DP3 > mDP4 > mDP5 > DP6 • DP1 > USB Type-C > DP3 > mDP4 > mDP5 > DP6 • DP1 > DP2 > VGA > mDP4 > mDP5 > DP6 • DP1 > USB Type-C > VGA > mDP4 > mDP5 > DP6 NOTE: Monitor cable hot plug—Screen layout settings are changed based on supported monitor resolution and the port to which the monitor is plugged in.
Multi-monitors support for different protocols This section contains information about using multiple monitors on different protocols. Support for multi-monitors in Citrix ThinOS supports ICA desktop multiple monitors in XenDesktop/XenApp 7.6 and later. Prerequisites: • Increase the value of MaxVideoMemoryBytes REG_DWORD to support one or more 4K resolution monitors. For more information, see Citrix documentation at support.citrix.com.
Support for multi-monitors in VMware Blast session ThinOS supports multiple-monitor display to run virtual machines on each monitor. Update the VMware Blast package to the latest version. The Horizon package version is 4.6.47369. User scenario: 1 Connect multiple monitors to ThinOS device. 2 In the Display Setup dialog box, disable Mirror Mode, and configure the display layout. 3 Launch a full screen VMware Horizon Blast session.
Support for multi-monitors in PCoIP ThinOS supports multiple-monitor display to run virtual machines on each monitor. User scenario: 1 Connect multiple monitors to ThinOS device. 2 In the Display Setup dialog box, disable Mirror Mode, and configure the display layout. 3 Launch a full screen PCoIP session. • Display numbers—Virtual machine needs sufficient video memory to support three or four monitors. The default video memory on VMware vSphere supports only two monitors.
Support for multi-monitors in RDP ThinOS supports multiple-monitor display to launch RDP desktops on each monitor. User scenario: 1 Connect multiple monitors to ThinOS device. 2 In the Display Setup dialog box, disable Mirror Mode, and configure the display layout. 3 Launch an RDP desktop with full screen. Table 30.
NOTE: In an RDP session with VOR enabled by default (Windows 8.1 x86), connect to a session with full screen, and span more than four 4K monitors. In this scenario, if you play a video, the session may be disconnected automatically with an error log RDP: The server-side graphics subsystem is in an error state and unable to continue graphics encoding. This is because VOR /x-264 requires more resources such as RAM than the server resources.
f Play a video, and check the audio output using the analog headset. Figure 12. Audio • Analog Headset Popup Select the Enable headset popup check box to display the headset popup dialog box when you connect an analog headset to the front audio jack. In the headset popup dialog box, select any one of the following audio devices: – Headset – Headphone – Speaker NOTE: To disable the headset popup dialog box, select the Not show again check box.
Simplified Certificate Enrollment Protocol enhancement In this release, Simplified Certificate Enrollment Protocol (SCEP) supports both HTTP and HTTPs protocol for RequestURL. You can add the protocol prefix before the URL. Other references • E-star—ThinOS 8.5.1 passed E-star 6.1 and E-star 7.0 with DP1, the resolution for E-star 7.0 is in progress post RTS. • IPv6—Certification is in progress post RTS. • DIMM—2 x 4 GB DIMM RAM performance improvement is in progress post RTS.
Package name Version TCX.i386.pkg 7.1.41853 Table 35. Packages for 8.5_108 build Package name Version horizon.i386.pkg 4.6.47369 TCX.i386.pkg 7.1.41853 RTME.i386.pkg 2.3.44433 FR.i386.pkg 1.20.46089 Upgrading BIOS on Wyse 5070 thin client This section describes the procedure to update BIOS on Wyse 5070 thin client with ThinOS, and Wyse 5070 thin client with PCoIP by using file server. The Dell Standard BIOS file is converted to BIN file format for signature and security purposes.
BIOS configuration on Wyse 5070 thin client Table 11 describes the INI parameters to configure Dell BIOS settings on Wyse 5070 thin client. Table 36. INI parameters INI parameters Description Device=DellCmos These INI parameters are applicable to thin clients with Dell standard BIOS.
INI parameters Description [ACRecovery={PowerOff, PowerOn, LastState}]—This option specifies how the system behaves when AC power is restored after an AC power outage. • • • PowerOff—System stays off after AC power is restored. PowerOn—System powers on after AC power is restored. LastState—System keeps the last power state as the last/ previous state of the system was before AC power was removed.
INI parameters Table 37. INI parameters INI parameters Description ConnectionBroker={default, VMware, Microsoft, Quest, AWS} This option specifies the type of VDI broker. *[EnableUnauthenticatedAccess]={yes, no} For VMware broker, ConnectionBroker=VMware is recommended. ConnectionBroker=VDM is still supported but deprecated. Set EnableUnauthenticateAccess=yes to enable VMware View broker login anonymously. The default value is no.
INI parameters Description • • • Excellent—network is good Typical—network is normal Poor—network is bad The Blast Extreme connection selects either UDP or TCP based on the network conditions. When the network is excellent and typical, the Blast Extreme connection selects the TCP. When it is poor, the Blast Extreme connection selects UDP.
INI parameters Description *[SCRemovalBehavior= {none or -1, logoff or 0, lock or 1, killsessions or 2}] The user must be a domain user, and the same sign-on user credentials must be available in the ftp://~/wnos/ini/directory. Set SCRemovalBehavior=killsessions can be used along with the AutoSignoff parameter. Device=vusb *[TCXDVCdefault={yes, no}] Privilege=None TCPTosDscp=[Default/CS1/CS2/CS3/CS4 /CS5/CS6/CS7/AF11/AF12/AF13/AF22/ AF23/AF31/AF32/AF33/AF42/AF43/EF] The default value is no.
INI parameters Description Taskbar—Specifies the style to be used for taskbar. The option wholescreen places the taskbar at the bottom of the entire screen. The option mainscreen places the taskbar at the bottom of the main screen. This is not applicable for Wyse 5070 thin client. Device=audio *[jack_popup=[yes, no] Specifies the ThinOS local audio setting. The default value of jack_popup option is yes. If jack_popup=no, it disables jack popup selection message when headset jack is plugged in.
INI parameters Description plan-text) are used to specify the SCEP administrator's credential, and ScepAdminUrl must be set correctly to specify the corresponding SCEP admin web page's URL. If EnrollPwd or EnrollPwdEnc is set, client tries to use these set of settings to automatically get an enrollment password and then use that password to request a certificate.
TOS priority settings for TosDSCP INI Routers treat network packets differently based on priority of the TOS tag in the IP header. IP header has a 1-byte field called TOS—Type of Service. IP precedence is older than DSCP. DSCP is compatible with IP Precedence. Table 38.
IP precedence (3 bits) Flash Override 4 Critical DSCP ( 6 bits) 100 AF 4 2.Medium AF32 011 100 (28) 3.High AF33 011 110 (30) 1.Low AF41 100 010 (34) 2.Medium AF42 100 100 (36) 3.High AF43 100 110 (38) 5 101 EF NA NA EF 101 110 (46) Internetwor 6 k Control 110 NA NA NA NA (48-55) Network Control 111 NA NA NA NA (56-63) 7 Table 40.
Table 41. Tested environment Component Version WMS 1.2 WDM 5.7.2 Imprivata OneSign 5.3.001.11 Caradigm 6.3.1 NetScaler 10.1/11.0/11.1/12.0 Store Front 2.6/3.6/3.12 Web Interface 5.4 SecureMatrix 4.1.0 Table 42. Tested environment Windows 7 VMware Horizon 7.3 √ XenDesktop 5.6 √ Windows 8.1 Windows 10 √ √ Linux Windows 2008 R2 √ √ XenApp 6.5 √ Windows 2016 APPs √ √ √ XenDesktop/ XenApp 7.6 √ √ XenDesktop/ XenApp 7.15 LTSR CU1 √ √ Tera PCM for AWS 1.
XenDesktop/ XenApp Operating System RTME Windows 2016 Lync client 2.3 Skype For Business 2016 Peripherals list This section lists the supported peripheral devices and peripheral ecosystem.
NOTE: ◦ Local test print is not supported. ◦ Mapping is supported through Citrix UPD with PCL 5 class. ◦ Redirection is supported. – Dell B1165nfw Mono Multifunction printer NOTE: ◦ Local test print is not supported. ◦ Mapping is supported through Citrix UPD with PCL 5 class. ◦ Redirection is supported.
– Plantronics P420 – Plantronics USB DSP DA40(B) – SENNHEISER USB SC230 – SENNHEISER SC 660 Binaural CC&O HS, ED – SENNHEISER SC 260 USB MS II – SENNHEISER SP 10 ML Speakerphone for Lync – SENNHEISER SC 660 USB ML – SENNHEISER D 10 USB ML-US Wireless DECT headset – SENNHEISER SC 260 USB MS II – SENNHEISER SC 75 USB MS – POLYCOM Deskphone CX300 – Jabra PRO 9470, Bluetooth NOTE: Bluetooth standard is not supported.
– Dell U2713Hb—2560x1440 – Dell U2713HM—2560x1440 – Dell U2713HMt—2560x1440 – Dell U3415W—3440x1440 – Dell U2718Qb—3840x2160 – Dell U2718Q—3480X2160 – Dell U2913 WM—2560x1080 – Dell U3014t—2560x1600 – Dell S2718D—2560x1440 – Dell S2817Q—3840x2160 – Dell D2215Hc—1920x1080 – Dell UZ2315H—1920x1080 – Dell 3008WFP—2560x1600 • DVD ROM – BENQ DVD Drive – Samsung portable DVD Writer SE-208 – Dell external DVDRW Drive – Dell DW316 • Cable/Converter – DisplayPort to HDMI adapter – DisplayPort to VGA adapter – USB
– Dell Keyboard KB-813 – Cherry Keyboard KC-1000 – SCR 3310 – Wyse 5070 thin client - Onboard smart card reader • Smart card – G&D FIPS 201 SCE 3.2 – Gemalto TOPDLGX4 144 – SafeNet SC650 – Oberthur ID One 128 v5.
Table 44. Smart card information from ThinOS event log Smart Card info from ThinOS event log Driver Provider (CSP) Card type ActivIdentity V1 ActivClient 6.2 ActivClient Cryptographic Service Provider Oberthur CosmopoIC 64k V5.2 ActivIdentity V1 (IDClassic 230) ActivClient 6.2 ActivClient Cryptographic Service Provider Gemalto Cyberflex Access 64K V2c ActivIdentity V2 ActivClient 6.2 ActivClient Cryptographic Service Provider Oberthur CosmopoIC 64k V5.2 Gemalto/IDPrime.NET (Gemalto .
Smart Card info from ThinOS event log Driver SafeNet High Assurance Applets SHAC v2.12.020 Provider (CSP) Card type SafeNet Smart Card Key Storage Provider SafeNet SC650 v4.1 Known issues This section describes the known issues in this release. Table 45. Known issues Issue number Issues description Workaround TL-923, BITS364686 A black or flickering screen is observed when you connect a 4K monitor to DP1 port on Wyse 5070 thin client with Intel Dual Band Wireless AC 9560 chipset.
Issue number Issues description Workaround TL-645 DP audio on Wyse 5070 thin client works only with DP1/2 ports from Intel GPU using DP direct cable. It does not work with DP3 Intel GPU or AMD GPU mDP/DP ports. Also, it does not work with DP convertor cable. There is no workaround. TIR96028 Connect monitor to DP1 or DP2; either of the ports works There is no workaround. correctly. For multimonitors, connect DP1 first, and then connect DP2, the DP audio works with DP1.
Issue number Issues description TIR95994 When you reconnect the displays, the application text may Reopen the window. be scattered. 60 ThinOS 8.
7 ThinOS 8.5_020 and ThinOS Lite 2.5_020 Priority and recommendations Recommended: Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software). Feature updates This section contains information about the feature updates. • VMware Horizon package is updated to version 4.6.
Platform Image filename BIOS filename Wyse 5010 thin client with ThinOS—D10D ZD10_wnos D10G_bios.bin Wyse 5010 thin client with PCoIP—D10DP PD10_wnos PD10G_bios.bin Wyse 5010 zero client for Citrix ZD00_xen ZD00_bios.bin Wyse 5040 AIO thin client—5212 ZD10_wnos AIO10G_bios.bin Wyse 5040 AIO thin client with PCoIP—5213 PD10_wnos PAIO10G_bios.bin Wyse 5060 thin client with ThinOS D10Q_wnos D10Q_bios.bin Wyse 5060 thin client with PCoIP PD10Q_wnos PD10Q_bios.
Table 49. Test environment Windows 7 VMware Horizon 7.0 √ Citrix Virtual Apps and Desktops 5.6 √ Windows 8.1 Windows 10 √ √ Windows 2008 R2 Linux √ Citrix Virtual Apps 6.5 Windows 2012 R2 √ √ Windows 2016 Apps √ √ √ Citrix Virtual Apps and Desktops/ Citrix Virtual Apps 7.15 √ Tera PCM for AWS 1.03 √* RDS 2012 R2/RDS 2016 √ √ √ √ √ √ √ √ √ √ √ √ √ *Amazon Workspace VM operating system—Windows 7 style—is actually based on 2008 R2 RDSH. Table 50.
Issue number Description TIR95744 In the Wyse 5060 thin client device, the BIOS is upgraded to address the issue where the client does not boot when a Bloomberg keyboard device is connected. TIR95896/ TIR96347 Improved reliability to prevent USB device probe failures during boot or when connecting USB devices after boot. TIR96019 Citrix session issue with error message Session VDMMN aborted is resolved.
Issue number Description TIR96668 Improved Horizon View session reliability when using Skype and other similar applications. TIR96586 Resolved an RDSH application focus issue. TIR96645 Improved Citrix Receiver session Reliability user experience. TIR96612 Issue related to selecting 3480x1600 resolution in Wyse 5060 thin client is resolved. TIR96610 Resolved an issue preventing the use of ELO2002L multi-touch monitors. TIR96631 Added ThinOS support for Dell Defender two-factor authentication.
Issue number Description TIR96132 SR961444036—Resolved an issue where Blast protocol session connections occasionally crash and result in blank sessions. TIR96916 Resolved an issue where Screensaver not found event log message is seen when using Wyse Management Suite. TIR97025 Resolved a ThinOS compatibility issue when using ELO Intellitouch monitors—ET2201L TIR96223 Resolved a BIOS compatibility issue affecting Medigenic keyboards in Wyse 5060 thin client.
8 ThinOS 8.5_017 and ThinOS Lite 2.5_017 Priority and recommendations Recommended: Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software). Feature updates This section contains information about the feature updates. • Citrix HDX RealTime Media Engine (RTME) package is updated to version 2.4.
Platform Image filename BIOS filename Wyse 5010 thin client with PCoIP—D10DP PD10_wnos PD10_bios.bin Wyse 5010 zero client for Citrix ZD00_xen ZD10_bios.bin Wyse 5040 AIO thin client—5212 ZD10_wnos ZD10_bios.bin Wyse 5040 AIO thin client with PCoIP—5213 PD10_wnos PD10_bios.bin Wyse 5060 thin client with ThinOS D10Q_wnos D10Q_bios.bin Wyse 5060 thin client with PCoIP PD10Q_wnos PD10Q_bios.bin Wyse 7010 thin client with ThinOS—Z10D ZD10_wnos ZD10_bios.
Table 56. Test environment Windows 7 VMware Horizon 7.0 √ XenDesktop 5.6 √ Windows 8.1 Windows 10 √ √ Windows 2008 R2 Linux √ XenApp 6.5 √ Windows 2012 R2 √ Windows 2016 Apps √ √ √ XenDesktop/ XenApp 7.15 √ Tera PCM for AWS 1.03 √* RDS 2012 R2/RDS 2016 √ √ √ √ √ √ √ √ √ √ √ √ √ *Amazon Workspace VM operating system—Windows 7 style—is actually based on 2008 R2 RDSH. Table 57.
Issue number Description TIR95322/TIR95991 Resolved an issue where the global security policy is set to warning during system reboot after factory default. TIR96289 Resolved an issue that results in RTME failed to probe and commit event log. TIR96376 Supports 3440 x 1440 display resolution. TIR96334 Supports the Citrix RTME 2.4 package. TIR96286 Resolved an issue with session artifacts when you close the Skype for Business application.
Issue number Description TIR95644 Resolved Citrix SignOn failure issue by adding NetScaler IgnoreDefaultGateway INI option to the ThinOS PNLiteServer parameter. TIR95679 Resolved an RTME compatibility issue that affects Vaddio AV bridge conferencing devices. TIR95839 Resolved an RDP session reconnection issue where RDP reconnections could not detect a network disconnection before the TCP/IP timeout.
Issue number Description TIR94363 Resolved the wireless memory allocation issue affecting RDSH connection stability on Wyse 3040 thin client. TIR93558 Resolved the issue where monitors may not wake up after a scheduled reboot on Wyse 5060 thin client. TIR95367 Reliability in using screen saver is improved. TIR95821 Reliability in using peripherals is improved. TIR95492/TIR96495 Resolved the mouse button combination issue observed in the Blast protocol when using the Catia application.
Issue number Description Workaround TIR93805 ELO USB touch screen does not work on Wyse ThinOS version 8.5 operating system. There is no workaround available in this release. ThinOS 8.5_017 and ThinOS Lite 2.
9 ThinOS 8.5_012 and ThinOS Lite 2.5_012 Priority and recommendations Recommended: Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).
Platform Image Wyse 3040 thin client with PCoIP PA10Q_wnos Wyse 5010 thin client with ThinOS—D10D ZD10_wnos Wyse 5010 thin client with PCoIP—D10DP PD10_wnos Wyse 5010 zero client for Citrix ZD00_xen Wyse 5040 AIO thin client—5212 ZD10_wnos Wyse 5040 AIO thin client with PCoIP—5213 PD10_wnos Wyse 5060 thin client with ThinOS D10Q_wnos Wyse 5060 thin client with PCoIP PD10Q_wnos Wyse 7010 thin client with ThinOS—Z10D ZD10_wnos Fixed issues The following are the fixed issues in this release
CIR Description CIR94594 3840 x 1600 monitor resolution is added in Wyse 5060 thin clients. CIR95067 EAP-PEAP negotiation failures due to TLS version checking is resolved. CIR95256 Sensitivity issues pertaining to DHCP option 199 is observed—Wyse Management Suite Group. CIR95326 DHCP option 199 results in client resets to factory defaults are resolved. CIR95008 General reliability is enhanced—Page fault callout.
CIR Description CIR92843 Support for the Safenet SC650 smartcard. CIR95671 General reliability is enhanced—hub_daemon. CIR95524 The client automatically adds: 80 to the URL when connecting to an http file server. CIR95488 General reliability is enhanced—Page fault. CIR95450 Resolved an issue preventing NLA logon using Gemalto IDPrime.Net smartcards. CIR94433 In Wyse 3040 thin client, 5 GHz wireless network reliability is enhanced.
Table 64. INI parameters Parameters Description PRIVILEGE=[None, Low, High] Default is high. [LockDown= {no, yes}] Privilege controls operator privileges and access to thin client resources. See also CCMEnable={yes, no}.
Parameters Description HidePPP—Default is no. Yes/no option to hide the Dialup Manager, PPPoE Manager, and PPTP Manager from view. HidePN—Default is no. Yes/no option to hide the PNAgent or PNLite icon from view on the taskbar. HideConnectionManager—Default is no. Yes/no option to hide the Connect Manager window from view.
Parameters Description DisableRotate—If the optional DisableRotate=yes is set, the rotate setting in the display setup is disabled. This is only valid for C class clients because the rotation performance in C class may not be desirable. NOTE: If the optional EnableNetworkSetup=yes is set with Privilege={none, low}, the network setup is enabled. If the optional DisableNetworkOptions=yes is set at the same time, the options table is disabled.
Parameters Description EnableKeyboardMouseSettings=yes can be replaced as: Privilege=none lockdown=yes EnablePeripherals=keyboard,mouse. FastDHCP—FastDHCP identifies the gateway first. If the gateway is same as the network before disconnection and the previous DHCP information is valid, the same information is used. The default value is yes. HideWlanScan—HideWlanScan is used to disable WiFi scan in lockdown mode. The default value is no.
Parameters Description [VUSB_VIDEO={yes, no}] 1 The port range is a list of start port and end port separated by a semicolon (;) or a comma (,). [VUSB_PRINTER={yes, no}] 2 Both ports must be between 1 and 65535. [FullScreen={no, yes}] 3 The end port must be greater than start port. For example, WyseVDA_PortRange=3000,3010, the start port is 3000, the end port is 3010.
Parameters Description [Locale=LocaleID]—Set Locale=LocaleID to set Locale in session for localization configuration to work. For information about LocaleID, see Msdn.microsoft.com/en-us/library/windows/ desktop/dd318693(v=vs.85).aspx. SessionLogoffTimeout—Setting SessionLogoffTimeout value forces all sessions to log off when user signs off from the broker. The default value is 0 which retains the same behavior as before, and also disconnects the sessions.
Parameters Description [State=state] manually or automatically through SCEP from this client, and the renewal is performed only after a certificate's 1/2 valid period has passed.
Parameters Description Use ScepAutoEnroll=no AutoRenew=yes to only enable SCEP auto renew; all other parameters are not needed if ScepAutoEnroll is set to no. NOTE: SCEP server’s URL must be an HTTP link. Do not add protocol prefix to RequestURL and ScepAdminURL. NOTE: INI parameter with an asterisk is a newly added parameter. ThinOS 8.5_012 and ThinOS Lite 2.
10 Upgrading firmware Downloading the installation file 1 Go to www.dell.com/support. 2 In the Enter a Service Tag, Serial Number, Service Request... field, type the Service Tag or the model number of your device, and press Enter or click the search icon. 3 On the product support page, click Drivers & downloads. 4 Select the appropriate operating system. 5 From the list, locate the file entry and click the download icon.
Table 66. BIOS binary files Platform BIOS binary filename Wyse 3010 thin client Not available Wyse 3020 thin client Not available Wyse 3030 LT thin client U10_bios.bin Wyse 3030 LT thin client with PCoIP PU10_bios.bin Wyse 3040 thin client A10Q_bios.bin Wyse 3040 thin client with PCoIP A10Q_bios.bin Wyse 5010 thin client D10G_bios.bin Wyse 5010 thin client with PCoIP PD10G_bios.bin Wyse 5040 AIO thin client AIO10G_bios.bin Wyse 5040 AIO thin client with PCoIP PAIO10G_bios.
To upgrade the ThinOS firmware using FTP server: 1 Ensure that you have downloaded the latest ThinOS firmware and latest ThinOS packages that corresponds to your thin client model. If the firmware and packages are in the form of a compressed self-extracting (.EXE) or zipped file (.ZIP), then extract the files. 2 Place the extracted firmware files in the C:\inetpub\ftproot\WYSE\wnos folder, and the packages to C:\inetpub\ftproot\WYSE\wnos \pkg on your FTP server. 3 Create a wnos.
Installing IIS creates the default directory C:\inetpub\WWWroot, which is known as the WWW root. In the WWWroot directory, create a folder WYSE and a sub folder wnos. The directory structure must read as C:\inetpub\wwwroot\WYSE\wnos. To upgrade the ThinOS firmware using HTTP or HTTPS server: 1 Ensure that you have downloaded the latest ThinOS firmware and latest ThinOS packages that corresponds to your thin client model. If the firmware and packages are in the form of a compressed self-extracting (.
9 Click Advanced Configuration. 10 In the Device Configuration pane, click Firmware Upgrade, and then click Configure this item. 11 From the Platform type drop-down list, select your thin client model. 12 From the Firmware to auto deploy drop-down list, select the firmware file that corresponds to your thin client model. 13 Click Save & Publish. The thin client restarts, and the firmware version is upgraded.
11 Resources and support Accessing documents using the product search 1 Go to www.dell.com/support. 2 In the Enter a Service Tag, Serial Number, Service Request, Model, or Keyword search box, type the product name. For example, Wyse 3040 thin client or Wyse ThinOS. A list of matching products is displayed. 3 Select your product and click the search icon or press Enter. 4 Click Manuals & documents. Accessing documents using product selector You can also access documents by selecting your product.
12 Contacting Dell Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for technical support or customer service issues, see www.dell.com/contactdell. If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or the product catalog.