Setup Guide

General settings for wnos.ini files, {username} INI,
and $MAC INI files
The following table contains the parameters used for configuring general settings. The underlined values are defaults.
Table 7. General Settings: wnos.ini files, {username} INI, and $MAC INI Files
Parameter
* Global overrides identically-named user
profile
** After sign off, user profile returns to
global value
Description
AdminMode={no, yes}
[admin-username=<encrypted_ username>]
[admin-password=<encrypted_ password>]
[Username=<username>]
[Password=<password>]
[ShowAdmin={yes, no}]
[Enc-username=encrypted_username]
[Enc-password=encrypted_password]
[ShowAESButton={yes, no}]
AdminMode —Default is no. Yes/no option to use the username and the
password to obtain a high thin client configuration when the privilege
parameter level is set to high (Privilege=high).
admin-username—Specifies if admin-username=encrypted_username, then
encrypted strings are used for admin-username; no minimum length; maximum
length is 30 characters—15 characters convert to 30 characters encrypted.
admin-password—Specifies if admin-password=encrypted_password, then
encrypted strings are used for admin-password; no minimum length; maximum
length is 30 characters—15 characters convert to 30 characters encrypted.
Enc-username—Specifies if the username is encrypted, and encrypted
strings are used for the Enc-username.
Enc-password—Specifies if the password is encrypted, and encrypted
strings are used for the Enc-password.
NOTE:
The AdminMode items are on the right-click menu.
username—Specifies the username; no minimum length; maximum length
is 15 characters.
password—Specifies the password; no minimum length; maximum length
is 15 characters.
ShowAdmin—If ShowAdmin is set to no and SSPR is set to yes, the SSPR
button takes the position of the admin button.
ShowAESButton—If you set ShowAESButton to Yes and then enter the
administrator mode, the AES Encrypt button populates in System Admin.
To launch the encrypted generator to generate enc-password for INI settings,
click AES Encrypt.
Set ShowAESButton=no, to hide AES Encrypt. If Enc-Username and Enc-
Password parameters are set, then the default value is yes. Otherwise, the
default value is no.
The ShowAdmin parameter enables or disables the local admin button in the
ThinOS Lite login window when StoreFront is disabled.
In this release, if the ShowAdmin parameter is set to no, and the SSPR button
is enabled, the SSPR button is positioned in the place of the admin button.
BootOrder={PXE, HardDisk, USB}
BootOrder — Sets the boot order for the BIOS. The boot order must follow
these rules:
1. The boot order is a list of these three options separated by a semi-colon
(;) or a comma (,).
2. Every option must be used.
3. The options must be different.
42 Parameters for wnos INI, {username} INI, and $MAC INI files