Release Notes

ManualsBrandsDell ManualsConverged InfrastructureWyse 7040 Thin Client

Windows Embedded operating system add-

ons and security updates

Release Notes

Summary of content (91 pages)

PAGE 1
Windows Embedded operating system addons and security updates Release Notes
PAGE 2
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2019 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
PAGE 3
Contents 1 Overview..................................................................................................................................... 9 2 Support matrix........................................................................................................................... 10 3 KBmonitor add-on for Windows 10 IoT Enterprise operating system................................................ 12 Release summary..................................................................................
PAGE 4
Add-on information........................................................................................................................................................24 Installation Procedure ........................................................................................................................................................ 24 Download the add-on package....................................................................................................................................
PAGE 5
Known issue......................................................................................................................................................................... 38 Installing the add-on............................................................................................................................................................38 Install the add-on using Wyse Management Suite....................................................................................................
PAGE 6
Supported platforms........................................................................................................................................................... 53 Installing the add-on manually............................................................................................................................................54 Known issues.....................................................................................................................................................
PAGE 7
22 Windows Security Updates........................................................................................................ 70 Release type and definition................................................................................................................................................ 70 Priority and recommendations........................................................................................................................................... 70 Supported platforms............
PAGE 8
Add a device to the new device collection.................................................................................................................88 Add a device to the existing device collection...........................................................................................................88 Package deployment.....................................................................................................................................................88 25 Resources and support.....
PAGE 9
1 Overview Dell Wyse thin clients running Windows Embedded Standard operating system provide access to applications, files, and network resources. Locally installed software permits remote administration of the thin clients and provides local maintenance functions. More add-ons are available that support a wide range of specialty peripherals and features for environments that require a secure user interface.
PAGE 10
2 Support matrix Table 1. Support matrix Add-on name Supported operating system Release date Release notes KBmonitor add-on for Windows 10 IoT Enterprise LTSB 2016 Windows 10 IoT Enterprise December 2019 KBmonitor add-on for Windows 10 IoT Enterpise LTSB 2016 CAD MAP VDI Enhancement version 3.0.6.0 Add-on for Windows 10 IoT-based thin clients Windows 10 IoT Enterprise December 2019 CAD MAP VDI Enhancement version 3.0.6.
PAGE 11
Add-on name Supported operating system Release date Release notes CADMAP updates for Dell Wyse 5060 thin client and Wyse 5070 thin client with Windows 10 IoT Enterprise Windows 10 IoT Enterprise September 2018 CADMAP updates for Dell Wyse 5060 thin client and Wyse 5070 thin client with Windows 10 IoT Enterprise Language Control Application version 1.0.
PAGE 12
3 KBmonitor add-on for Windows 10 IoT Enterprise operating system Release summary This release note contains information about the KBmonitor add-on for Windows 10 IoT Enterprise LTSB 2016 and Windows 10 IoT Enterprise 2019 LTSC. The add-on addresses the low space issue when you deploy the security patches to thin clients with 32 GB flash. The add-on monitors the free space available in the thin client.
PAGE 13
Table 3. Tested management servers Management server Version Wyse Management Suite 1.4.1 NOTE: It is recommended to update the Wyse Device Agent on the client side before deploying security updates using Wyse Management Suite version 1.4.1. Add-on information Table 4. Add-on information Component Details Name KBmonitor.exe Size 4,368,328 bytes Important notes • • • • • KBmonitor add-on must be deployed before deploying security packages manually or using Wyse Management Suite.
PAGE 14
8. Verify the copied package in the applications list. 9. To create a group in the Wyse Management Suite server, click Groups & Configs. The Groups & Configs page is displayed. 10. Click the Plus sign (+) button and enter the required details to register your client in the same group. 11. Click Apps and Data. The Apps and Data page is displayed. 12. Click Thin Clients under App Policies. 13. Click Add Policy to add the policy to the required group. 14. Update the required fields and click Save.
PAGE 15
4 CAD MAP VDI enhancement version 3.0.6.0 add-on for Windows 10 IoT-based thin clients Release summary This release note contains information about the CAD MAP VDI version 3.0.6.0 add-on.
PAGE 16
Platforms Flash/SSD/SED/HDD /eMMC size RAM Size Build Package Name Wyse 5470 All-in-One Thin Client 32 GB eMMC 4 GB WIE10_5470_All_in_One_June2019.exe Wyse 5470 All-in-One Thin Client 128 GB SSD Wyse 5470 Thin Client 32 GB SSD WIE10_5070_November2019.exe 8 GB WIE10_5470_All_in_One_June2019.exe WIE10_5070_November2019.exe 4 GB WIE10_5470_July2019.exe WIE10_5070_November2019.exe Wyse 5470 Thin Client 32 GB SSD 8 GB WIE10_5470_July2019.exe WIE10_5070_November2019.exe Table 6.
PAGE 17
Fixed issues Table 9. Fixed issues Issue ID Description WIN-1179 Fixed an issue where the Ctrl+Alt+Del key does not work in the Citrix session when the Allowhotkey parameter is set to 0. WIN-1137 Fixed an issue where the letter L is entered on the VDI screen when you press the Win+L key to lock the VDI screen. The issue is observed when you release the Win key before releasing the L key.
PAGE 18
5 Dell Overlay Optimizer Application Add-on to fix SymLink Vulnerability Release summary This release note contains information about the add-on for Dell Overlay Optimizer application to address the SymLink vulnerability issue. You can deploy the add-on to thin clients running Windows 10 IoT Enterprise operating system. The add-on replaces the log path of the affected Windows Embedded Standard applications such as DewMgr, Dewsvc, and Dewdrv.cer with C:\Wyse\WAPPS\DEW.
PAGE 19
Platforms Flash/SSD/SED/HDD/eMMC RAM Size size Build Package Name Wyse 5070 Thin Client with Pentium processor 64 GB SSD 8 GB WIE10_RS5_5070_September2 019.exe Wyse 5070 Extended Thin Client with Pentium processor 64 GB SSD 8 GB WIE10_RS5_5070_September2 019.exe Wyse 5070 Thin Client with Celeron processor 32 GB eMMC 4 GB WIE10_RS5_5070_September2 019.exe Table 12.
PAGE 20
6 Wyse Easy Setup Application Add-on to fix SymLink Vulnerability Release summary This release note contains information about the add-on for Wyse Easy Setup to address the SymLink vulnerability issue. You can deploy the add-on to thin clients running Windows 10 IoT Enterprise operating system. The add-on replaces the log path to %UserProfile% \Documents\Wyse\WyseWin\WyseEasySetup. Priority and recommendations Urgent: Dell highly recommends applying this update as soon as possible.
PAGE 21
Platforms Flash/SSD/SED/HDD/eMMC RAM Size size Build Package Name Wyse 5070 Extended Thin Client with Pentium processor 64 GB SSD 8 GB WIE10_RS5_5070_September2 019.exe Wyse 5070 Thin Client with Celeron processor 32 GB eMMC 4 GB WIE10_RS5_5070_September2 019.exe Table 16. Windows 10 IoT Enterprise Threshold 1 Platforms Flash/SSD/SED/HDD/eMMC RAM Size size Build Package Name Wyse 7040 Thin Client 128 GB SSD/256 GB SED/500 GB HDD 7040_0A79_32GB_Standard.ex e 4 GB/8 GB/16 GB Table 17.
PAGE 22
7 Windows Embedded Standard Applications Add-on to fix SymLink Vulnerability on Windows 10 IoT-based Thin Clients Release summary This release note contains information about the add-on for Windows Embedded Standard applications to address the SymLink vulnerability issue. You can deploy the add-on to thin clients running Windows 10 IoT Enterprise operating system. The add-on replaces the log path of the affected Windows Embedded Standard applications with C:\Wyse\WAPPS.
PAGE 23
Compatibility Test environment Table 19. Windows 10 IoT Enterprise Redstone 1 Platforms Flash/SSD/SED/HDD/eMMC RAM Size size Build Package Name Wyse 5070 Thin Client with Celeron processor 64 GB SSD 8 GB WIN10_5070_March2019.exe Wyse 5070 Thin Client with Pentium processor 64 GB SSD 8 GB WIN10_5070_March2019.exe Wyse 5070 Extended Thin Client with Pentium processor 64 GB SSD 8 GB WIN10_5070_March2019.exe Wyse 5070 Thin Client with Celeron processor 32 GB eMMC 4 GB WIN10_5070_March2019.
PAGE 24
Management server Version Site version: 5.0.8412.1000 Wyse Device Manager Site version: 5.0.8790.1000 5.7.3 NOTE: You can use Wyse Device Manager 5.7.3 to manage Wyse 7040 Thin Clients only. Add-on information • • • • Name—WESAPPS_WIE10_SymlinkVulnerability_Fix.msi Version—1.0.0.0 Size—3.99 MB (4,191,744 bytes) Silent parameter for remote installation—/qn Installation Procedure Download the add-on package This section describes the steps to download the add-on from Dell support site. 1. Go to www.
PAGE 25
16. Go to the App Policy job, and enter the description. 17. From the Run drop-down menu, select Immediately. 18. Click Preview and then click Schedule. The package deployment takes a few minutes to complete. NOTE: • The lock screen is displayed during the package installation process on all the thin clients. • System reboots two times during the package deployment. Install the add-on using Wyse Device Manager This section describes the steps to install the add-on using Wyse Device Manager. 1.
PAGE 26
Add a device to the new device collection This section describes the steps to add a thin client to the new device collection list. 1. Go to Assets and Compliance > Device Collections. 2. In the Devices list, right-click a device, and go to Add Selected Items > Add Selected Items to New Device collection. 3. In the Device Collections window, enter the new device collection details, such as name and limiting collection, and click OK. 4.
PAGE 27
The content status is displayed in green. It may take a few minutes to complete the distribution process. Create and deploy a task sequence This section describes the steps to create and deploy a task sequence. 1. Copy the .exe file to a shared folder. 2. Expand Software Library > Overview > Operating System. 3. Right-click Task Sequence, and click Create Task Sequence. 4. In the New Task Sequence wizard, select Create Custom Task Sequence, and click Next. 5. Click Close. 6.
PAGE 28
8 CAD MAP VDI Enhancement (WIN+L support) version 3.0.3.0 and WinLock workstation version 3.0.3.0 Add-on Release summary This release note contains information about the CAD MAP VDI and Winlockworkstation add-on for Wyse 5070 thin client with Windows 10 IoT Enterprise Red stone images. This feature is to use WIN+L key in remote sessions and user can enable or disable the WIN+L key in local sessions using WinLock Workstation application. Version CAD_MAP_VDI v3.0.3.0 Winlockworkstation v3.0.3.
PAGE 29
Table 24. Supported management servers Management Server Version Wyse Management Suite 1.3 SCCM 2016 Version 1606 Console Version: 5.0.8412.1307 Site version: 5.0.8412.1000 Previous version CAD_MAP_VDI v.3.0.0.2 Add-on information Table 25. Add-on information for Winlockworkstation.exe Component Details Add-on Name Winlockworkstation.exe File Version 3.0.3.0 Size 4.15 MB (4,360,984 bytes) Type of file .exe Table 26. Add-on information for CAD_MAP_VDI_WIE10_64bit.
PAGE 30
1. Log in as an administrator and disable UWF. 2. Copy the downloaded CAD_MAP_VDI_WIE10_64bit.msi file to C:\Temp folder. 3. Double-click the CAD_MAP_VDI_WIE10_64bit.msi file and follow the on-screen instructions. 4. Click Finish and enable UWF. Installing Winlockworkstation.exe add-on manually in client The following are the steps to install Winlockworkstation.exe add-on manually in client: 1. Login to Admin account and Disable UWF. 2. Copy the Winlockworkstation.exe to C:\Temp folder (folder to be create
PAGE 31
10. To disable local Winlock workstation provide /WD , for enabling local Winlock workstation, provide /WE. 11. And click Save and Yes to schedule a Job Immediately. 12. In App Policy Job, update Description 13. Run > Immediately and click Preview and click Schedule. 14. Go to Jobs for ensure the Job status. 15. Lock screen will be there when pushed from WMS. Install the add-on using System Center Configuration Manager 2016/2019—SCCM Prerequisites: 1. 2. 3. 4. 5. 6. 7. Disable the write filter.
PAGE 32
14. Click Close. Deploy CAD_MAP_VDI_WIE10_64bit.msi application 1. Select Software Library > Overview > Application Management and then select Applications. 2. Right-click on CAD_MAP_VDI application in right pane and click Deploy. 3. Browse and select the Device Collection and click on OK in General page. 4. Click on Next and select the Distribution point in Content Destination page and click on Next. 5. Select Required under Purpose in Deployment Settings page and click Next. 6.
PAGE 33
9 BIOS Add-on with AMD Microcode to fix Side Channel Vulnerability for Wyse 5020 and 7020 Thin Clients running Windows Embedded Operating System Release summary The scope of this release is to update BIOS with AMD Microcode to address the Side Channel security vulnerability for Wyse 5020 Thin Client and Wyse 7020 Thin Client running the Windows Embedded operating system. Version 2.
PAGE 34
Previous version 2.0F Add-on details • • File name—WES_5020_7020_BIOS_20G.zip File size—7 MB The zip file contains the following three add-ons: • • • WES7P_5020_7020_BIOS_20G.exe WIE10_5020_7020_BIOS_20G.exe WES7_5020_7020_BIOS_20G.exe NOTE: The file size of the add-ons is 2.4 MB. Tested management servers and USB Imaging Tool version Table 28. Management Servers and USB Imaging Tool Version Management Server Version Wyse Management Suite 1.4 Wyse Device Manager 5.7.3 USB Imaging Tool 3.1.
PAGE 35
Installing the add-on Install the add-on using Wyse Management Suite This section describes the steps to install the add-on using Wyse Management Suite. 1. Register the device to the Wyse Management Suite server, and add the device to the respective groups. 2. Copy the .exe file to the Wyse Management Suite server repository, C:\WMS\LocalRepo\repository\osImages\zipped. 3. Log in to Wyse Management Suite. 4. Click Portal Administration, and then click File Repository under Console Settings. 5.
PAGE 36
11. Select the respective RSP file , and click Browse. 12. Select the add-on path. The list of selected packages is displayed. 13. Select the appropriate operating system. 14. Click Upload. The status is displayed as Success, and the package is displayed under Images. 15. Go to Devices and select the target client. 16. Click Update. 17. Go to Select Package > Images, and select the add-on package. 18. Click Save. A pop-up is displayed on the target device. 19. Click Update Now on the target device.
PAGE 37
10 BIOS add-on with AMD microcode to fix Side Channel vulnerability for Windows Embedded operating system Release summary The scope of this release is to update BIOS with AMD Microcode to address the Side Channel security vulnerability on Dell Wyse 5060 thin clients running the Windows Embedded Standard 7P and Windows 10 IoT Enterprise operating system. Version 1.0K Release date May 2019 Priority and recommendations Urgent: Dell highly recommends applying this update as soon as possible.
PAGE 38
• • WES7P_5060_BIOS_10K.exe—file size 33,54,218 bytes WIE10_5060_BIOS_10K.exe—file size 33,59,674 bytes Tested management servers and USB Imaging Tool version Table 31. Management Servers and USB Imaging Tool Version Management Server Version Wyse Device Manager 5.7.3 Wyse Management Suite 1.4 USB Imaging Tool 3.1.0 • • • • • • Wyse Device Agent must be upgraded to the latest version before deploying the BIOS add-on. Extract the add-on from the zipped folder and copy the .
PAGE 39
14. Update the required fields and click Save. 15. Click Yes to schedule the job immediately. 16. Go to the Image Policy job, and enter the description. 17. From the Run drop-down menu, select Immediately. 18. Click Preview and then click Schedule. The package deployment takes a few minutes to complete. NOTE: System reboots once during the package deployment. Install the add-on using Wyse Device Manager This section describes the steps to install the add-on using Wyse Device Manager. 1.
PAGE 40
If your USB drive contains images, these images are displayed on the screen. 8. Select the operating system architecture that you want to push to the target device. Select one of the following: • • 32 bit—Select this option to push the 32-bit architecture-based operating system to the target device. 64 bit—Select this option to push the 64-bit architecture-based operating system to the target device. 9. To add a new local image on the USB drive, click the Local tab, and add the BIOS file.
PAGE 41
11 Intel Bluetooth Pairing Vulnerability Fixes Add-on Release type and definition This release notes contains information about the Intel bluetooth add-on for Wyse 5060 thin client, Latitude E7270 mobile thin client, Latitude 3460 mobile thin client, and Latitude 5280 mobile thin client. This add-on addresses the security vulnerability issue Bluetooth Pairing (INTEL-SA-00128). Priority and recommendations Urgent: Dell highly recommends applying this update as soon as possible.
PAGE 42
Version information and components name Table 35. Version information Locations Old driver version New driver version Windows 10 IoT Enterprise Windows Embedded Standard 7P Windows 10 IoT Enterprise Windows Embedded Standard 7P 5060 5280 E7270/3460 5060 5060/5280 E7270/3460/50 60 Dell Thin Client - 20.40.0 Installed Products 19.60.0 19.0.1603.0650 19.0.1601.0594 20.70.2 20.60.0 Device Manager 20.40.0.3 19.60.0.3 19.0.1603.630 9.0.1601.582 20.70.0.4 20.60.0.
PAGE 43
Issue ID Issue description Workaround WS-2246 A yellow exclamation mark is observed on Bluetooth peripheral devices in Device Manager after you connect a mobile Bluetooth device to the client. 1. Go to Control Panel > Devices & Printers > Devices and select the device. 2. Go to Properties > Services and clear the respective Bluetooth services. WS-2244 Occasionally, uninstallation of Bluetooth add-on does not clean up, even after successful job completion from management servers.
PAGE 44
12 OSComponentCleanup Add-on for Windows 10 IoT Enterprise Redstone 1 Release type and definition This release contains information about the OSComponentCleanup add-on for Windows 10 IoT Enterprise Redstone 1. This add-on increases free space by optimizing the disk space on thin clients that run Windows 10 IoT Enterprise. This OSComponentCleanup add-on is supported on the thin clients with 32 GB or a higher disk configuration.
PAGE 45
8. Double-click the OSComponentCleanup.msi file and follow the on-screen instructions. 9. Click Finish and enable UWF. Known issues Table 40. Known issues Issue number Issue description Workaround WS-852 Installation progress bar displays Completed before running the DISM command. There is no workaround in this release. Important notes • • • When you install the OSComponentCleanup add-on for the first time, it may take 1-3 hours to finish the component clean-up.
PAGE 46
13 Language Control Add-on Version 2.1 for Windows Embedded Standard with Multilingual User Interface Release type and definition This release note contains information for deploying the unified multilingual user interface image on top of non–unified image with language meta data in the merlin partition. Imaging the client brings up the unit in the same multilingual user interface language present in merlin.
PAGE 47
Operating system Platform Wyse 7010 thin client Wyse 7020 thin client New feature The new feature in this release is: LanguageControl_2.1.exe—It writes language meta data to the merlin partition.
PAGE 48
Add-on details Table 42. Add-on details Add-on name Size in bytes LanguageControl_2.1.exe 122,880 Add-on package details • • • • This package writes the language meta data to the merlin partition. This package deploys Windows Embedded Standard builds. The system restarts twice while deploying the package. Minimum free space required to install the package is 5 MB. Energy Star test Thin client meets the ENERGY STAR version 6.0 requirements.
PAGE 49
14 CADMAP updates for Dell Wyse 5060 thin client and Wyse 5070 thin client with Windows 10 IoT Enterprise Release type and definition This release note contains information about the CADMAP tool update for Wyse 5060 thin client and Wyse 5070 thin client with Windows 10 IoT Enterprise Redstone 1 image. These add-ons enable Win+L and Ctrl+Alt+Delete key to function in the remote session such as Remote Desktop, Citrix, and VMware sessions.
PAGE 50
Issue number Known issues Workaround WC-816 Temp folder is not deleted after you push the CAD_MAP_VDI_WIE10_64bit.msi add-on using WDM. There is no workaround for the issue.
PAGE 51
15 Language Control Application version 1.0.0 Add-on Release type and definition Intel Bluetooth 8265 and Intel Wireless 8265 add-on package for thin clients that run Windows 10 IoT Enterprise Windows Embedded Standard 7P, and Windows 10 IoT Enterprise operating system. You can install this package by using Wyse Device Manager, Wyse Management Suite, and System Center Configuration Manager.
PAGE 52
Platforms Flash size RAM size Build number Dell Wyse 7010 thin client 16 GB 4 GB BZB0_7064_16GB.exe Wyse 7010 Extended thin client 16 GB 4 GB BZB0_7064_16GB.exe Dell Wyse 7020 thin client 16 GB 4 GB BOB0_7064_16GB.exe Supported management software Table 49. Supported management software Management software Version Wyse Device Manager 5.7.3 Wyse Management Suite 1.3 System Center Configuration Manager 2016 Microsoft System Center Configuration Manager Version 1606 Console Version—5.0.
PAGE 53
16 Write Filter update for Windows Embedded Standard 7 Operating System Release type and definition This release note contains information about the Windows Writefilter_Update add-on for Windows Embedded Standard 7E and Windows Embedded Standard 7P images. This update addresses the following CIRs: • • CIR92178 CIR92116 CAUTION: Please follow proper write filter and Windows Page File usage instructions at all times.
PAGE 54
Installing the add-on manually You can install the add-on manually. 1. Log into the thin client as administrator and disable the File-Based Write Filter option. 2. Copy the WriteFilter_UpdateWES7E.msi or WriteFilter_UpdateWES7P.msi add-on to C:\Temp folder. 3. Double-click the WriteFilter_UpdateWES7E.msi or WriteFilter_UpdateWES7P.msi file and follow the instructions displayed on the screen. 4. Click Finish. The add-on is installed on the thin client. Known issues Table 51.
PAGE 55
17 Unified Write Filter RAMDisk Size add-on for Microsoft Windows 10 IoT Enterprise Release type and definition This release note contains information about the UWF RAMDisk Size add-on for Windows 10 IoT Enterprise Threshold and Red stone images. NOTE: The UWF RAMDisk Size application sets the UWF cache size and RAMDisk size. CAUTION: Please follow proper write filter and Windows Page File usage instructions at all times.
PAGE 56
Installing add-on manually 1. Log in as an administrator and disable the write filter. 2. Create a temp folder in . 3. Copy the UWF_RAMDisk_Size.msi file to the temp folder. 4. Double-click the UWF_RAMDisk_Size.msi file, and follow the on-screen instructions. 5. Click Finish to exit the installer. 6. Reboot the thin client. Important notes When the write filter is enabled, • • UWF cache size for thin clients with 8 GB RAM is set to 2 GB, and RAMDisk size is set to 512 MB.
PAGE 57
18 Custom Field Thin Client Application add-on for Microsoft Windows 10 IoT Enterprise Release type and definition This release note contains information about the Custom_Field_Thin_Client_Application add-on for Windows 10 IoT Enterprise Threshold and Redstone 1 images. CAUTION: Please follow proper write filter and Windows Page File usage instructions at all times.
PAGE 58
Component Description Build size 4,287,488 bytes License information This section contains the license information for Newtonsoft.Json.dll 6.0.3.17227 component.
PAGE 59
19 Write Filter update for Windows 10 IoT Enterprise Threshold and Redstone Operating System Release type and definition This release note contains information about the Windows Writefilter_Update add-on for Windows 10 IoT Enterprise Threshold and Red stone images. This update addresses the following CIRs: • • CIR92178 CIR92116 CAUTION: Please follow proper write filter and Windows Page File usage instructions at all times.
PAGE 60
Build information Table 59. WriteFilter_Update.msi Build file name Version Build size WriteFilter_Update.msi 1.0.4.11 3,180,544 bytes Known issues Table 60. Known issues Known issues Workaround The UWF icon in the taskbar should be red in color when the caution message is displayed. There is no workaround for the issue in this release. When UWF is disabled using the shortcut icon on the desktop, the legal message is not displayed. There is no workaround for the issue in this release.
PAGE 61
20 Windows Embedded Standard Security Update to Mitigate Meltdown and Spectre Vulnerability Release type and definition This release note contains information about the Windows Embedded Standard security updates to mitigate meltdown and spectre vulnerabilities on the following operating systems: • • • • Windows Embedded Standard 7 Windows Embedded Standard 7P Windows Embedded Standard 8 Windows 10 IoT Enterprise Speculative execution of meltdown and spectre vulnerabilities can be used to read the memory a
PAGE 62
Test environment Table 61. Supported Windows Embedded Standard 7 platforms Platform name Memory configuration Build number Wyse 3030 thin client 16 GB flash/4 GB RAM 9.09 build 7064 Wyse 5010 thin client 16 GB flash/4 GB RAM 9.09 build 7064 Wyse 5020 thin client 16 GB flash/4 GB RAM 9.09 build 7064 Wyse 7010 thin client 16 GB flash/4 GB RAM 9.09 build 7064 Wyse 7010 Extended thin client 16 GB flash/4 GB RAM 9.09 build 7064 Wyse 7020 thin client 16 GB flash/4 GB RAM 9.
PAGE 63
Dependencies Ensure that you update Wyse Device Agent or HAgent to the latest version on the client before you proceed with the security updates through Wyse Device Manager version 5.7.2 or Wyse Management Suite version 1.1. Security update details Table 67. Security update details File name File size in bytes KB4056897_WES7.exe 38,043,648 IE11_KB4056568_WES7.exe 30,212,096 KB4056897_WES7P.exe 70,340,608 IE11_KB4056568_WES7P.exe 55,209,984 KB4056899_WE8S.exe 20,717,568 KB4056893_WIE10.
PAGE 64
21 WPA2 Security Vulnerability Add-on Release type and definition This release signifies WPA2 Security Vulnerability for the Windows-based thin clients. For information about the supported platforms, see Supported platforms As with any technology, robust security research that pre-emptively identifies potential vulnerabilities is critical in providing strong protection. This issue can be resolved through simple software updates.
PAGE 65
Platform name Build Add-on name Latitude E7270 mobile thin client with WES7P E7270_7065_128GB.exe IntelWiFiDriver_E7270_3460.exe Latitude 3460 mobile thin client with WES7P 3460_7065_128GB.exe IntelWiFiDriver_E7270_3460.exe Table 70. Windows 10 IoT Enterprise Threshold Platform name Build Add-on name Wyse 7020 thin client with Win10 IoTZ90Q10 GOG0_0A62_32GB.exe IntelWiFiDriver.exe Wyse 7020 Accelerated Graphics thin client with Win10 IoT-Z90QQ10 GOG0_0A62_32GB.exe IntelWiFiDriver.
PAGE 66
Known issues Table 74. Known issues Known issues Workaround Wireless connection is disconnected. SSID is removed from the saved wireless list in the thin client when you try to unregister the thin client from the WMS server. NA Wyse Device Manager: C:\Temp is not deleted, and the lock screen is not available when you push from Wyse Device Manager. Edit the .rsp manually in the server side with DT command to delete C:\Temp and enable lock screen with LU and EL. SCCM: C:\Temp is not deleted.
PAGE 67
Components Support information Wyse 7010 thin client with WES7—Z90D7 Wyse 7020 thin client with WES7—Z90Q7 Wyse 5020 thin client with WES7P—D90Q7P (European Build) Wyse 7020 thin client with WES7P—Z90Q7P (European Build) Wyse 7020 Accelerated Graphics thin client with WES7P— Z90QQ7P (European Build) Wyse 5020 thin client with WES7P—D90Q7P (Asian Build) Wyse 7020 thin client with WES7P—Z90Q7P (Asian Build) Wyse 7020 Accelerated Graphics thin client with WES7P— Z90QQ7P (Asian Build) D90D7P Z90D7P Wyse 5020 t
PAGE 68
Table 80. Add-on information for Latitude 5280 mobile thin client Components Support information Platforms Latitude 5280 mobile thin client with Win10 IoT Add-on Name IntelWiFiDriver_5280.exe Type of file Application (.exe) Size 149 MB-1572,74,016 bytes Driver version 20.10.1.3 Language English-United States Important notes Table 81. Additional information Sl.
PAGE 69
Sl.
PAGE 70
22 Windows Security Updates Release type and definition This release includes information about Windows Embedded security updates for Microsoft Bluetooth driver spoofing vulnerability for Dell Wyse thin client platforms. This release includes information about Windows Embedded security updates for Microsoft Bluetooth driver spoofing vulnerability for Dell Wyse thin client platforms. A spoofing vulnerability exists in the Bluetooth stack.
PAGE 71
Table 84. Supported platforms for Windows 10 IoT Enterprise TH Platform name Memory configuration (RAM/flash) WIE10 TH builds Wyse 5020 thin client 32 GB flash and 4 GB RAM 1. 02 build 0A38 Wyse 7020 thin client 32 GB flash and 4 GB RAM 1. 02 build 0A38 Wyse 7020 accelerated graphics thin client 32 GB flash and 4 GB RAM 1. 02 build 0A38 Table 85.
PAGE 72
Build information The platform-specific build details are as follows: Table 86. KB4038777_WES7 Build file name Build size (Bytes) KB4038777_WES7.exe 127,393,792 bytes Table 87. KB4038779_WES7 Build file name Build size (bytes) KB4038779_WES7.exe 263,98,720 bytes Table 88. KB4038777_WES7P Build file name Build size (bytes) KB4038777_WES7P.exe 208,035,840 bytes Table 89. KB4038779_WES7P Build file name Build size (bytes) KB4038779_WES7P.exe 43,921,408 bytes Table 90.
PAGE 73
23 Dell Wyse 5060 Thin Client with WES7P for Tier 3 Language support Release type and definition This release supports Windows Embedded Standard 7P — WES7P 64–bit that supports Dell Wyse 5060 thin client for the Ransomware WannaCrypt susceptibility. WannaCrypt, also known as WannaCry, targets out-of-date Windows systems. This release build contains valid WES7P security updates—KB4012212 to protect your system from the ransomware WannaCrypt susceptibility.
PAGE 74
Table 93. Platform specific build details—WDM package Component Build details Version 9.07 Build number 7067 Build WSI Package Name 5060_7067_32GB.exe Build size (Bytes) 17.0 GB (18,272,322,441 bytes) Localization English, French France, German, Italian, French Canada, Spanish, Japanese, Chinese Simplified, Chinese traditional, Korean, Portuguese Brazil Table 94. BIOS details Component BIOS details Platform Dell Wyse 5060 thin client with WES7P Version 1.
PAGE 75
• Dynamic Throttling for higher performance Menu driven Custom/ConfigMgr Sysprep • • Supports Menu driven Custom / ConfigMgr Sysprep where you can select the particular option. Shrinking of disk information available during Sysprep that reduces the image pull or push time in larger disks. New versions of connection brokers • • VMware Horizon Client: 4.1.0.1487 Citrix Receiver: 14.4.0.
PAGE 76
• • Performance enhancements: IE 11 is the quickest version of the browser yet. Microsoft has included support for web standards like CSS animations, HTML5 spell checking, and improved JavaScript performance. Security enhancements: The main security addition to IE 11 is Enhanced Protected Mode, which locks down parts of the Windows operating system, preventing the browser from accessing the OS. IE Customizations: 1. 2. 3. 4. 5. 6. First run customizations are disabled.
PAGE 77
Known issues The following table lists the known defects in this release: Table 95. Known issues Sl. no. Issue description Work around—if any 1 Multiple bluetooth device icons are displayed in the system tray—Periodic issue. The functionality is not affected and restarting the client removes the icons. 2 While running WES7P_CustomSysprep4man.bat, Low Disk space message appears at system tray. The functionality is not affected.
PAGE 78
Sl. no. Issue description Work around—if any 19 Citrix Receiver USB redirection always works for all users of the client machine with No work-around all published Xendesktops, irrespective of the setting Simplify device connections for me in the xen desktop connection preferences UI. 20 Copyright Information for Flash.sys, Wyse RAM Disk is showing as Wyse/Wyse technology. No work-around 21 KB2880890 is displayed twice in View installed updates section.
PAGE 79
Product Logitech B525HD webcam Dell Tray Load CD/DVD player(DW316) Dell USB Wired Keyboard - KB216 Dell USB Wired Optical Mouse - MS116 Dell USB Wired Keyboard with Smart Card reader - KB813 Dell Wireless Mouse - WM326 Dell 24 Monitor - E2417H Dell 23 Monitor- E2316H Dell 22 Monitor - E2216H Dell 20 Monitor - E2016H Dell 20 Monitor - E2016 Dell 19 Monitor - E1916H Dell 19 Monitor - E1916HV Dell 27 Monitor - P2717H Dell 24 Monitor - P2417H with stand Dell 24 Monitor - P2417H without stand Dell 23 Monitor - P
PAGE 80
Product DP to VGA converter Used and free space details Table 97. Used and free space details Platform Flash size Used Space (C: Drive) Free space Wyse 5060 thin client 64 GB 14.2 GB 44.6 GB OS Components Table 98. Driver details Component Version VGA 15.201.2401.0 Ethernet/ SFP Adapter 7.101.714.2016 Realtek HD Audio 6.0.1.7541 AMD Hi Def Audio Device 7.12.0.7723 USB xHCI driver 1.1.0.185 Wyse RAM Disk Driver 5.0.2183.4 flash.sys 1.0.7.0 Dell Open Print Drivers 1.91.7882.
PAGE 81
Applications/Features/Files Version—If applicable Tight VNC 2.6.4.0 Microsoft Lync VDI 2013 15.0.4420.1017 .NET Framework 4.6.01055 WSUS Supported Microsoft Management Console Management Console 3.0 Version 6.1 (Build 7601: SP1) Microsoft Silverlight 5.1.30514.0 Bit locker with TPM Supported Windows Multi-touch Supported Background Intelligent Transfer Service (BITS) Supported Windows Defender Definition 1.227.441.
PAGE 82
Applications/Features/Files Version—If applicable NumLockTrigger.exe 1.0.0.5 TimeZonePreservation.exe 1.0.0.4 Wfacss.exe 1.0.1.3 WindowsEmbeddedTest.exe (equivalent to WES7Test.exe) Not applicable Winlog.exe Part of Client Info WinPing.exe Not applicable Winterm.dll 2.0.0.9 Xwfile.exe 1.0.0.5 Sysprep4man scripts Build_Master.cmd QFEs added in the release Table 100.
PAGE 83
QFEs added in the release KB2506212 KB2892074 KB3121461 KB2509553 KB2893294 KB3122648 KB2511455 KB2893519 KB3123479 KB2515325 KB2894844 KB3124275 KB2526967 KB2898785 KB3124280 KB2534366 KB2900986 KB3126587 KB2544893 KB2908783 KB3127220 KB2545698 KB2911501 KB3133977 KB2547666 KB2913431 KB3134814 KB2552343 KB2913751 KB3135445 KB2556532 KB2918077 KB3135983 KB2560656 KB2919469 KB3137061 KB2563227 KB2929733 KB3138378 KB2564958 KB2931356 KB3138612 KB2570814 KB2937610 KB
PAGE 84
QFEs added in the release KB2667402 KB2985461 KB3149090 KB2676562 KB2992611 KB3150220 KB2679255 KB2999226 KB3153171 KB2685747 KB3000483 KB3153199 KB2685811 KB3003743 KB3153731 KB2685813 KB3004361 KB3154070 KB2690533 KB3006121 KB3155178 KB2698365 KB3006137 KB3156013 KB2705219 KB3010788 KB3156016 KB2706045 KB3011780 KB3156017 KB2709715 KB3021674 KB3156019 KB2716513 KB3021917 KB3156417 KB2718704 KB3022777 KB3159398 KB2719033 KB3023215 KB3160005 KB2719857 KB3030377 KB
PAGE 85
QFEs added in the release KB2800095 KB3075851 KB4015193 KB2807986 KB3076949 KB4015546 KB2808679 KB3078601 KB4016446 KB2813170 KB3078667 KB947821 KB2813347 KB3083324 KB976902 KB2813430 KB3083710 KB976932 KB2818604 KB3084135 KB4015549 KB2834140 KB3086255 KB3139398 Dell Wyse 5060 Thin Client with WES7P for Tier 3 Language support 85
PAGE 86
24 Installing the add-on Download the add-on package This section describes the steps to download the add-on from Dell support site. 1. Go to www.dell.com/support. 2. In the Enter a Service Tag, Serial Number, Service Request, Model, or Keyword field, type the Service Tag or the model number of your device, and press Enter or click the search icon. 3. On the product support page, click Drivers & downloads. 4. Select the appropriate operating system. 5.
PAGE 87
Install the add-on using Wyse Device Manager This section describes the steps to install the add-on using Wyse Device Manager. 1. Copy the respective .exe file to the WDM server. 2. Launch Wyse Device Manager and login using valid credentials. 3. Click Applications in the Dell Wyse Device Manager dashboard page. The options Images, Other Packages, Agent Update, Device Configuration, and PCoIP Device Configuration are displayed. 4. Select Other Packages. 5. Click Create Package Plus (+).
PAGE 88
Add a device to the new device collection This section describes the steps to add a thin client to the new device collection list. 1. Go to Assets and Compliance > Device Collections. 2. In the Devices list, right-click a device, and go to Add Selected Items > Add Selected Items to New Device collection. 3. In the Device Collections window, enter the new device collection details, such as name and limiting collection, and click OK. 4.
PAGE 89
24. Click Next to complete the deployment process. 25. Click Close. The content status is displayed in green. It may take a few minutes to complete the distribution process. Create and deploy a task sequence This section describes the steps to create and deploy a task sequence. 1. Copy the .exe file to a shared folder. 2. Expand Software Library > Overview > Operating System. 3. Right-click Task Sequence, and click Create Task Sequence. 4.
PAGE 90
25 Resources and support Accessing documents using the product search 1. Go to www.dell.com/support. 2. In the Enter a Service Tag, Serial Number, Service Request, Model, or Keyword search box, type the product name. For example, Wyse 3040 thin client or Wyse ThinOS. A list of matching products is displayed. 3. Select your product and click the search icon or press Enter. 4. Click Manuals & documents. Accessing documents using product selector You can also access documents by selecting your product. 1. 2.
PAGE 91
26 Contacting Dell Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for technical support or customer service issues, see www.dell.com/contactdell. If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or the product catalog.