Citrix Receiver for Windows Embedded Operating System Release Notes
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2019 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents 1 Overview........................................................................................................................................................5 Version matrix.....................................................................................................................................................................5 2 Citrix Receiver Standard 4.12.0......................................................................................................................
Installing add-on using Wyse Device Manager.............................................................................................................28 Installing add-on using System Center Configuration Manager 2016—SCCM....................................................... 28 Adding device to new device collection.................................................................................................................. 29 Creating and distributing a package......................................
1 Overview Citrix Receiver is a server-based computing technology that separates the logic of an application from its user interface. The Citrix Receiver client software that is installed on the thin client device enables you to interact with the application GUI, while all the application processes run on the server. Version matrix The following table summarizes the Citrix Receiver versions that are supported by Wyse thin clients: Table 1.
2 Citrix Receiver Standard 4.12.0 Priority and recommendations Recommended: Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software). New features The following are the new features for Citrix Receiver Standard 4.12.0: • Crypto kit update—DTLS version 1.
Package name: CitrixReceiverStd_4_12_WES7.exe • This package installs Citrix Receiver Standard 4.12.0 on Windows Embedded Standard 7 builds. • The system restarts twice during the installation. • Minimum free disk space required to install this package is 250 MB. • The build size of the package is 76,815,592 bytes. • Adobe Flash version must be same on the local client and Citrix Virtual Apps and Desktop (Formerly Citrix XendDesktop) for Flash Redirection. Package name: Citrix_HDX_RTME_2.5.
Issue ID Issue Description Workaround WS-2218 CAD map key functionality does not redirect Ctrl+F1 to Ctrl+Alt+Del in XD session when Desktop Viewer is enabled in Citrix server. For the CAD Map redirection (Ctrl+F1 to redirect Ctrl+Alt +Del) in Citrix VDA session follow these steps: 1 2 Disable Desktop Viewer in Citrix Virtual Apps and Desktop server that is based on the article CTX209468 Provide https:// CitrixBrokerServerFQDN/ citrix/teststore/PNAgent/ config.
Table 5.
Table 7. Management server details Server Version Wyse Device Manager 5.7.3 Wyse Management Suite 1.2 SCCM 2016 Microsoft System Center Configuration Manager Version 1606 Console Version: 5.0.8412.1313 Site version: 5.0.8412.1000 10 Citrix Receiver Standard 4.12.
3 Citrix Receiver Standard 4.11.0 Priority and recommendations Recommended: Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software). New features The following are the new features for Citrix Receiver Standard 4.11.0: • Show or hide the remote language bar feature is supported.
• Minimum free disk space required to install this package is 250 MB. • Adobe Flash version must be same on the local client and XenDesktop for Flash Redirection. • The build size of the package is 74,419,704 bytes. Package name: Citrix_HDX_RTME_2.4.exe • This package installs HDX RTME 2.4 on Windows Embedded Standard 7 Enterprise, Windows Embedded Standard 7 Professional, Windows Embedded 8 Standard, and Windows 10 IoT Enterprise builds.
Issue Description Workaround Receiver from version 4.6 to 4.11 on Windows Embedded Standard 7P operating system. You cannot start Citrix published desktops on Windows Embedded You must reinstall HDX RTME version 2.4. Standard 7 and Windows Embedded Standard 7P operating system. Test environment The following tables provide details about the tested platforms, with the configuration and builds for Citrix Receiver Standard 4.11.0. Table 10.
Table 12.
4 Citrix Receiver Standard 4.10.1 Priority and recommendations Recommended: Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software). New features The following are the new features in this release: • Improved DPI Support (configuring DPI scaling) • Support for use of H.
• Adobe Flash version must be same on the local client and XenDesktop for Flash Redirection. Package name: CitrixReceiverStd_4_10_1_WIE10.exe • This package installs Citrix Receiver Standard 4.10.1 on Windows 10 IoT Enterprise. • The system restarts twice during the installation. • USB redirection works for all users of the thin client with all published XenDesktops. This feature is independent of the Simplify device connections for me settings in the XenDesktop connection preferences UI.
Test environment The following tables provide details about the tested platforms, with the configuration and builds for Citrix Receiver Standard 4.10.1. Table 15.
Platform Memory configuration Build number Wyse 5020 thin client with WE8S 32 GB Flash and 4 GB RAM 0930 Platform Memory configuration Build number Wyse 7020 thin client with Win10 IoT 32 GB Flash and 4 GB RAM 0A62 Wyse 5020 thin client with Win10 IoT 32 GB Flash and 4 GB RAM 0A62 Wyse 7020 accelerated graphics thin client with Win10 IoT 32 GB Flash and 4 GB RAM 0A62 Wyse 5060 thin client with Win10 IoT 32 GB Flash and 4 GB RAM 0A60 Wyse 7040 thin client with Win10 IoT 256 GB SED/128 S
5 Citrix Receiver Standard 4.9.0 Priority and recommendations Recommended: Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software). New features The following are the new features for Citrix Receiver Standard 4.9.
• The system restarts twice during the installation. • USB redirection works for all users of the client machine with all published Citrix Virtual Apps and Desktop, irrespective of the setting Simplify device connections for me in theCitrix Virtual Apps and Desktop connection preferences UI. • During WDM package deployment, the Citrix Receiver uninstallation status is displayed in the foreground of the lock screen for 1-2 seconds. • Citrix Receiver Connector opens in lock mode for 10 seconds.
Platform Memory configuration Windows Embedded Standard 7 builds Wyse 5010 thin client with WES7 (D90D7) 16 GB Flash and 4 GB RAM 7064 Wyse 7020 thin client with WES7 (Z90Q7) 16 GB Flash and 4 GB RAM 7064 Wyse 5020 thin client with WES7 (D90Q7) 16 GB Flash and 4 GB RAM 7064 Platform Memory configuration Windows Embedded Standard 7P builds Wyse 7020 thin client with WES7P (Z90Q7P) 16 GB Flash and 4 GB RAM 7066(Asian) Wyse 7020 thin client with WES7P (Z90Q7P) 16 GB Flash and 4 GB RAM 7065(
Platform Memory configuration Windows 10 IoT Enterprise builds Wyse 7020 accelerated graphics thin client with Win10 IoT (Z90QQ7P) 256 GB SSD and 8 GB RAM 0A62 Wyse 5060 thin client with Win10 IoT 32 GB Flash and 4 GB RAM 0A60 Wyse 7040 thin client with Win10 IoT 256 GB SED/128 SSD/500 HDD and 4 GB/8 GB RAM 0A62 Latitude 3480 mobile thin client 128 GB SSD and 8 GB RAM 0A63 Latitude 5280 mobile thin client 128 GB Flash and 8 GB RAM 0A64 22 Citrix Receiver Standard 4.9.
6 Citrix Receiver Standard 4.8.0 Priority and recommendations Recommended: Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software). New features This section provides information about the new features in this release. Deploying the Citrix Receiver 4.8.
Operating system Details More information: • • System reboots 2 times during the Citrix Receiver 4.8.0 package deployment. Citrix Connector opens in lock mode for 10 seconds. Windows Embedded 8 Standard—WE8S Filename—CitrixReceiverStd_4.8.0.1010_WE8S.exe Minimum requirements: • • • Minimum free disk space required to install this package is 300 MB. You can install this package on WE8S builds installed on a flash drive of 16 GB or higher storage space.
Sl. No. Description Workaround 5 Not available In Wyse 5060 thin client, the Low Memory message may be displayed when you start Skype for Business in the Citrix session. Build details This section provides the build details for different operating systems. Table 27. Build details Operating system Filename File size Windows Embedded Standard 7 (WES7) CitrixReceiverStd_4.8.0.1010_WES7.exe Windows Embedded Standard 7 Professional (WES7P) CitrixReceiverStd_4.8.0.1010_WES7P.
Platforms Storage RAM Build Wyse 7020 thin client with WES7P (Z90Q7P)—Asian 16 GB flash 4 GB 7066 Wyse 7020 accelerated graphics thin client with WES7P (Z90QQ7P)—European 16 GB flash 4 GB 7065 Wyse 7020 accelerated graphics thin client with WES7P (Z90QQ7P)—Asian 16 GB flash 4 GB 7066 Wyse 7040 thin client with WES7P 256 GB SED/ 128 GB SSD/ 500 GB HDD 4 GB/ 8 GB 7065 D90D7P 16 GB flash 4 GB 896 Z90D7P 16 GB flash 4 GB 896 Latitude E7270 mobile thin client 128 GB flash 8 GB 7065
7 Installing the add-on Downloading the installation file 1 Go to www.dell.com/support. 2 In the Enter a Service Tag, Serial Number, Service Request... field, type the Service Tag or the model number of your device, and press Enter or click the search icon. 3 On the product support page, click Drivers & downloads. 4 Select the appropriate operating system. 5 From the list, locate the file entry and click the download icon.
19 Click Yes. NOTE: The lock screen is displayed during the package installation process on all the thin clients. The package is deployed immediately. Installing add-on using Wyse Device Manager Follow these steps to register a package using Wyse Device Manager: 1 Go to support.dell.com. 2 Click Product Support, enter the Service Tag of your thin client, and then click Submit. NOTE: If you do not have Service Tag, manually browse for your thin client model. 3 Click Drivers and Downloads.
7 In the Actions tab, select each action, and click Run Now. A sys-tray pop up message is displayed, and the new software is available for installation. 1 Adding the device to the device collection—see Adding device to new device collection. 2 Creating and distributing a package—see Creating and distributing a package. 3 Creating a task sequence—see Creating a task sequence. 4 Deploying a task sequence—see Deploying a task sequence.
24 Right-click on the created package, and click Deploy. 25 Click Collection, and browse to the device collection list. 26 Select the device, and click Next. 27 From the Add drop-down list, select Distribution Point. 28 Select the available distribution points, and click OK. 29 Click Next to complete the deployment process. 30 Click Close. The content status is displayed in green. It may take a few minutes to complete the distribution process.
8 Resources and support Accessing documents using the product search 1 Go to www.dell.com/support. 2 In the Enter a Service Tag, Serial Number, Service Request, Model, or Keyword search box, type the product name. For example, Wyse 3040 thin client or Wyse ThinOS. A list of matching products is displayed. 3 Select your product and click the search icon or press Enter. 4 Click Manuals & documents. Accessing documents using product selector You can also access documents by selecting your product.
9 Contacting Dell Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for technical support or customer service issues, see www.dell.com/contactdell. If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or the product catalog.