Administrator Guide

Upgrade methods

You can upgrade Wyse Converter for PCs using any of the following methods:

• Remote upgrade using SCCM—see Upgrading Wyse Converter for PCs using SCCM

• Local upgrade on your PC—see Upgrading Wyse Converter for PCs on a local device

• Remote upgrade using Wyse Management Suite—see Upgrading Wyse Converter for PCs using Wyse Management Suite

NOTE: You can upgrade Wyse Converter for PCs from versions 1.0, 1.0.1, 1.1 to version 2.0 using Wyse Management Suite 1.3

only. However, you must install the latest WDA version 14.3.0.66.

Topics:

• Upgrading Wyse Converter for PCs using SCCM

• Upgrading Wyse Converter for PCs on a local device

• Upgrading Wyse Converter for PCs using Wyse Management Suite

Upgrading Wyse Converter for PCs using SCCM

Prerequisites

• Ensure that Wyse Converter for PCs 1.0, 1.0.1 or 1.1 is installed.

• Ensure that the latest version of Windows QFEs and the drivers is installed.

• Ensure that a genuine version of the Windows operating system is installed.

• Ensure that Unied Write Filter is disabled—Applicable only to Windows 10 Enterprise operating systems.

• Ensure that Dell Write Filter is disabled—Applicable only to Windows 7 operating systems.

• Ensure that the existing user name is not WyseUser or WyseAdmin.

• Ensure a minimum disk space of 4 GB is available.

• Ensure that antivirus is disabled.

• Ensure Windows Secure Boot is disabled.

• Ensure that you are logged in as an administrator.

Steps

1 Launch the SCCM console.

2 Go to Software Library > Overview > Application Management > Applications.

3 Right-click Applications, and click Create Application.

The Create Application Wizard window is displayed.

4 On the General page, click Manually specify the application information.

5 Click Next.

6 On the General Information page, specify the information about the application and click Next.

7 On the Application Catalog page, specify the information about how you want to display the application when you browse the

Application Catalog.

8 On the Deployment Types page, click Add to create a deployment type.

The Create Deployment Type Wizard window is displayed.

9 On the General page, click Manually specify the deployment type information.

10 Click Next.

11 On the General Information page, specify the information about the application and click Next.

Upgrade methods 11