Administrator Guide

4 Click Wyse Software Thin Client.
The Wyse Software Thin Client page is displayed.
5 After conguring the options, click Save and Publish.
For information on registering the Wyse Software thin clients and conguring the policy settings using Wyse Management Suite, see Wyse
Management Suite 1.3 and later version Administrator’s Guide at dell.com/support/manuals.
Conguring RAM disk size
About this task
RAM disk is a volatile memory space used for temporary data storage.
The following items are typically stored on the RAM disk:
• Browser web page cache
• Browser history
• Browser cookies
• Browser cache
• Temporary internet les
• Print spooling
• User/system temporary les
To congure the RAM disk size, do the following:
Steps
1 Log in as an administrator.
2 Go to Start > Dell Thin Client Application.
The Dell Thin Client Application window is displayed.
3 On the left navigation bar, click RAM Disk.
4 In the RAM disk size eld, type or select the RAM disk size you want to congure, and then click Apply.
If you change the size of the RAM disk, you are prompted to restart the system for the changes to take eect.
NOTE
:
To permanently save the information, disable the Unied Write Filter (UWF). For more information, see Before conguring
your Wyse Software thin clients.
Dynamic RAMDisk conguration based on Write Filter
status
RAMDiskSize application monitors and determines the RAM disk size based on the status of Write Filter. When Write Filter is turned on, the
RAM disk size is set to 100 MB. If the system RAM is lesser than 4 GB and the Write Filter is turned o, the RAM disk size is set to 100 MB
and system temp is redirected to C:\Windows\Temp. The Windows 7 32-bit operating system supports only 4 GB RAM SKU. The system
RAM set to more than 4 GB is considered only as 4 GB. If the system RAM is 4 GB or higher, the RAM disk size is set to 2 GB.
Pagele
A pagele is a reserved portion of a hard disk that is used as an extension of random access memory (RAM) for data in RAM.
In Wyse Converter for PCs 2.0, a separate volume of size 2 GB is created for pagele. The Unied Write Filter overlay is congured to disk
and Microsoft does not support pagele on the write protected volume. The pagele is created on a separate volume (drive) during a fresh
installation or an upgrade to Wyse Converter for PCs 2.0 and all the page le settings are preserved and are restored after uninstallation of
Conguring
your Wyse Software thin client 27