Install Guide

• and then either check or uncheck “Allow administrator interaction when the private key is accessed by the CA” check box
• And click Next button to open Congure CA Name window. NOTE: Common name of the certicate should match with WDM
server's computer name.
23 In CA Name window, provide the values for Common name for this CA and Distinguished name sux elds and click Next to open
Validity Period window.
24 In the Specify Validity Period window, select the validity period for the certicate generated for this CA and click Next to open
Certicate Database window.
25 In Certicate Database window, select the Certicate database location and Certicate database log location and click Next to open
Conrmation window.
26 Then in Conrmation window, click on Congure button which will launch the progress window.
27 Then in the Results window, Certication Authority and Certication Authority Web Enrollment Conguration succeeded message will
appear.
28 Click on Close button to nish the conguration of AD CS.
29 Now the installation of certicate in domain controller server is done, go to the installation of certicate on WDM server.
Installing the Certicate on the WDM Server:
Use the following guidelines:
1 On the taskbar, click Start->Administrative Tools->Internet Information Services (IIS) Manager to open the IIS Manager window.
2 In the tree pane, click on the Server and on the right pane double click on Server Certicates to open Server Certicates Window.
3 Click on Create Domain Certicate link on right most pane and ll in the information requested in the Create Certicate window and
click Next to open Online Certication Authority.
4 In Online Certication Authority, click select to Specify Online Certication Authority (created in your AD Controller machine or in your
setup) and provide a Friendly Name for the same and click Finish.
5 Now the installation of certicate in WDM server is done.
6 After the installation of certicate, browse through Server -> Sites->Rapport HTTP Server and click on Bindings... on right most pane
to open Site Bindings window.
7 In Site Bindings window, click Add to Add Site Binding
8 In Add Site Binding, select Type as HTTPS, and select Certicate Authority under IP Address, select the recently created certicate
from SSL Certicate combo drop down box and click OK button.
9 In order to start only HTTPS communication, select SSL Settings under Server->Web Sites->Rapport HTTP Server.
10 In SSL Settings, select Require SSL check box and ‘Require’ radio button for Client certicate and Apply the settings.
60
Installing Wyse Device Manager