Administrator Guide
Figure 88. Permissions for Rapport
Deploying Teradici image version 5.x from 4.x rmware using DDC in WDM
To deploy the Teradici image version 5.x from 4.x rmware using DDC in WDM, do the following:
1 Open WDM Web UI and login as administrator.
2 Go to System > Console, and enable Default Device Conguration (DDC), and click the Save button.
3 Go to Updates > DDC, and click the+ button to add new DDC.
4 Select ThreadX as operating system from the Select Operating System drop-down list.
5 Select the preferred media size from the Select Media Size drop-down list.
6 Select the preferred view from the drop-down list.
7 Click Add to include the new DDC to the groups.
8 Select the registered image from the Image drop-down list.
9 Select the registered certicate package from the Packages drop-down list.
10 Select the device check-in from the Execute DDC drop-down list.
11 Click the Save button to save DDC.
12 Go to the Devices page and refresh the device information. The device gets rebooted and discovered to WDM automatically as
ThreadX_5x devices.
106
Management of Teradici device using WDM