Administrator Guide
Deploying Teradici image version 5.x using selected devices in WDM
To deploy Teradici image version 5.x using selected devices in WDM, do the following:
1 Open WDM Web UI and login as administrator.
2 Go to Applications > Images, and click the + button to download the package registration utility
3 Click the RSP button from the package registration utility.
4 Click the Browse button, and upload ThreadX 5.x rmware package to WDM.
5 Go to WDM Web UI again, and go to Devices page.
6 Select the devices which are required to upgrade using the check box.
7 Click the Update button, and select the registered package from the Images category.
8 Click the Save button to schedule package deployment. The package gets deployed.
9 Go to Jobs page and conrm whether the package deployment is successfully completed. The device gets rebooted and discovered
to WDM automatically as ThreadX_5x devices.
Figure 89. Devices
NOTE
: After successful deployment of the 5.x rmware on the client, if the devices are not appearing on the WDM as
ThreadX5x devices, refer to EMSDK fails to start due to port number to resolve port conict of the ThreadX 5x software
components, and see if the problem is solved.
Management of Teradici device using WDM 107